15-1919.fm Page 20 Monday, July 19, 1999 12:34 PM
To control specific lamps and appliances directly from the RF command console, press the top but- ton of the corresponding module number (1, 2, 3, 4 or 5, 6, 7, 8) to turn on the module. Press the bot- tom button to turn off the module.
6.To brighten or dim lights connected to lamp and wall switch modules, turn on the specific module (as described in Step 5). Then press and hold Brt or Dim on the system’s remote control (or BRIGHT or DIM on the RF command console). Release the key when the desired brightness is reached.
4 5 6
7 8 9
ENTER | 0 | LAST |
|
|
PROG TV/VCR DISPLAY
CH |
Off |
SCAN |
Brt |
VOL |
VOL |
Dim |
MUTE |
ALL |
OFF |
Note: You must turn lights on individually to use the dimmer. It does not work if you turned all the lights on at the same time from the system’s remote control or RF command console.
Need help? Call 1-800-950-7044!
20