7. To exit the fast search mode, press SET UP.
Note: You can search up to 11 codes for a particular device (TV, VCR, cable, and so on).
Channel Scan
The channel scan feature lets you scan through all channels on your TV, VCR, or cable box, stopping at each channel for about 3 seconds.
To scan through available channels, first press the de- vice key (TV, VCR, or CBL). Then aim the system’s re- mote control at the device and press SCAN. The 6 in 1 system automatically scans through available chan- nels. To stop scanning, press any key on the remote control.
Note: If you are not using the command module, the re- mote control must be pointed at the device the entire time you use channel scan.
Favorite Channel Scan
The Favorite Channel Scan feature lets you set up your system’s remote control to scan through a list of up to 10 channels you select.
Follow these steps to set up a list of your favorite chan- nels.
1.Press the desired device key (TV, VCR, or CBL).
2.Press and hold down SET UP until the red indica- tor blinks twice.
3.Release SET UP and press 9 9 6.
4.Enter the number of the first channel, then press and release SET UP.
For example:
09 SET UP (for Channel 9)
12 SET UP (for Channel 12)
14 SET UP (for Channel 14)
Need help? Call 1-800-950-7044!
14