Using the Remote

Once you have completed all the programming for the remote (see “Preparation” on Page 7), you are ready to use your 6-In-One Remote.

1.Point the remote at the desired device and press the device key (TV, VCR, CBL/SAT, DVD, CD, or AUX). Then press POWER to turn on the device.

2.Press the desired command keys.

3.Repeat Steps 1 and 2 for all other devices you want to operate.

4.To turn off the last device you selected, press

POWER.

To turn off another device, press the device key, then press POWER. Repeat to turn off all devices.

Note: You can program POWER as a master power key to turn all devices on and off in a sequence. See “Programming the Power Key” on Page 12.

USING THE LIGHT

Your remote has a backlight so you can see the keys

in the dark. To turn on the light, press at the top right of the remote.

When you press a key, the remote lights for a few sec-

onds. To turn off the light, press again.

USING CHANNEL SCAN

Note: If you programmed SCAN/FAV for Favorite Chan- nel Scan, you cannot use it for Channel Scan until you reset SCAN/FAV (see “Resetting Scan” on Page 11).

If you want to view a sample of every channel on your cable or SAT/DSS service, press CBL/SAT, then press SCAN/FAV. Starting with the current channel, the re- mote control tunes to each channel in ascending order every three seconds. Press any key to stop the scan.

16Operation