1.On the remote control, press the desired device key once.
2.Hold down P until the red light blinks twice.
3.Press 9 9 0. The red light blinks twice.
4.To view the code for the first digit, press 1. Count the number of blinks (for example, if there are three blinks, the first digit is 3) and write down the number.
Note: The red light will not blink if the code digit is a “0”.
5.Repeat Step 4 three more times for each succes- sive digit by pressing and releasing 2, 3, and 4.
Troubleshooting
If the remote control stops working after you have suc- cessfully tested the control for each device, or if you are unable to get the remote control to work at all, do the following:
•Be sure you press the device key for the device you want to control before you press any other key.
•Confirm that your IR devices are working properly by using the original remote control or the manual controls.
•Replace the batteries.
If you have any other problems, call customer service at
CARE
Keep the remote dry; if it gets wet, wipe it dry immedi- ately. Use and store the remote only in normal temper- ature environments. Handle the remote carefully; do not drop it. Keep the remote away from dust and dirt,
24Troubleshooting