Device Types

You can use the remote control’s device keys to con- trol the following types of devices:

TV — TV

VCR — VCR or PVR (Personal Video Recorder)

CBL/SAT — Cable converter or SAT/DSS receiver

DVD — DVD or LD Player

AUX — Amplifier, tuner or other audio device

CD – CD Player

SETTING UP YOUR REMOTE

To control devices other than the default brands (for example, an RCA TV, VCR, and cable converter or SAT/DSS receiver, a Pioneer DVD player, CD player, and auxiliary device), perform the following steps. If you use the default brand devices, skip this section.

1.Refer to “Manufacturers’ Codes” on Page 25 and write down the code(s) for the brand of each device you want to program on the supplied label.

Note: Some manufacturers may have several codes listed. Try each until you find the right one. If you cannot find the correct code, see “Using Manual Code Search” on Page 23.

2.Turn on all your home entertainment devices.

3.On the remote control, press the desired device key (TV, VCR, CBL/SAT, DVD, CD or AUX).

Note: For TV/VCR combinations, press VCR and use the VCR code listed for your model under “Television-VCR Combo Codes” on Page 45. If your TV/VCR combination also lists a TV code, you must program the TV separately by repeating Steps 3–5 to add volume control. In Step 3, press TV, then in step 4 enter the TV code.

Preparation9