
Note: For
USING FAVORITE CHANNEL SCAN
To scan favorite channels, you must first program the favorite channel table (see “Programming Favorite Channel Scan” on Page 10).
Press the desired device key (TV or CBL/SAT), then press SCAN/FAV. The remote tunes to each favorite channel in ascending order every three seconds. Press any key to stop the scan.
USING MACROS
Press the desired macro key once for the first channel you programmed (see “Programming Macros” on Page 12), twice for the second channel, and so on.
USING THE POWER KEY
To turn on all devices, hold down POWER for at least 2 seconds. Each device turns on in the sequence you programmed (see “Programming the Power Key” on Page 12).
To turn off all devices, press TV, then hold down POW- ER for at least 2 seconds. You should see each device turn off in sequence.
Note: If you do not press TV first before holding down POWER, the sequence will skip the currently selected device.
CHANGING VOLUME LOCK
Your remote’s Volume Lock is preset so the volume and mute keys only control the TV volume, no matter what device is selected. If you want the remote to con- trol the TV’s volume only, skip this section and leave the original settings intact.
However, if you want to control another device’s vol- ume functions (for example, CBL/SAT, VCR, DVD,
Operation17