Speco Technologies 4HD manual Motion Zone Setup, PTZ Control Setup Screen

Page 22

②Press SEL button or double click to enter the menu. Then PTZ menu screen is displayed.

Figure 3.4.3. PTZ Control Setup Screen

Note: For speed dome cameras that support RS-485, connect them directly to the RS-485 port. If the camera is controlled with RS-232C, use a RS-485 to RS-232C signal converter.

On the PTZ control setup screen, you can select or set the protocol type of the camera that is the same as the one installed on the site. If the camera has a specific camera ID, select the camera ID using the control button (◀ ▲ ▶ ▼).

The following options are available on the PTZ setup screen. CHANNEL (channel number that the PTZ is connected to) NAME (protocol type)

SPEED (19200, 14400, 9600, 4800, 2400) ID (0-63)

3-4-3. Motion Zone Setup

Select MOTION ZONE using the control button (◀ ▲ ▶ ▼) and select either PARTIAL ZONE or FULL ZONE using the control button (◀ ▲ ▶ ▼). And press the SEL button.

If FULL ZONE is selected, the motion setting screen is not displayed. Only set the level of sensitivity for

MOTION SENSITIVITY.

22

Image 22

Contents Channel HDcctv Digital Video Recorder Model DVR4HDSafety Precautions These Precautions Must Be Followed For Safety Reasons Product Components Basic Function of the Mouse Page Specification SpecificationSpecifications are subject to change without notice Table of Contents 10-2-1 Name and Function Front PanelSelect VGA ConnectionVideo RSVSetting Up the DVR Setup Main Screen1. Setup Menu Tree Page Setup Display Mode Setup Recording ModePage 2. Schedule Recording Setup Screen Recording SchedulesSetup Device Mode Alarm OUTAlarm-Out PTZ SetupMotion Zone Setup 3. PTZ Control Setup ScreenSetup Storage Mode 4. Motion Zone Selection ScreenDisk Info 1. Menu Items in Storage Setup Screen DescriptionA.R.T Setup System Mode YYYY/MM/DD MM-DD-YYYY DD-MM-YYYYSend Mail SavingConnection Period 1~24 Setup, PlaybackPB, PTZ, Record OFFR/OFF, and Network Setup Security ModePassword Check User Password ADMIN, NETWORK, USER1, USER2, USER3Port number Default Setup Network ModeWeb Sever Port number Ports Network Access beyond RouterWeb Viewer Network Access Beyond Router Network Types StaticDhcp DdnsFollow settings such as Language, DVR ID, Security User Setup Config Mode1. Config Setup LoadSaving Setup Setup -QUICK Setup ModeLive Viewing Screen 1. Status Indicator Icons in Live ScreenLive, Search, and Playback Icon DescriptionSearch Screen ArchTime-Line Search 2. Time-Line SearchEvent Search 3. Event Search ScreenGo To Specific Time Go To First TimeGo To Last Time Log Search1. Button Functions in Play Mode Play modePLAY/PAUSE PTZ Control PTZ Autoscan2. Description of RS-485 Port Video Backup onto USB Flash Drive Still Image Backup onto USB Flash DriveBack Up Playback of Backup Video Transferring Still Images or Video from the Archive List1. HD Player Upgrading Firmware Installing the Network Software Network Access Using the Single-Site Network ViewerPC Requirements Live Monitoring Mode and Functions Date & Time Display ModeSetup CONNECT/DISCONNECTImage Capture of Live Screen Disconnect Remote Search Mode and FunctionsBi-Directional Audio LiveMark OUT Button Display ModeMark CalendarBackup of Video in the Remote DVR PC System Configuration Setting GeneralSetting Site Setting EventSetting Record Network Access Using the Multi-Sites Network Viewer Live Window Button DescriptionSite Management Connect Search and Playback Window Main control panel Event List Setup Miscellaneous Page Page Page Remote Setup Video Image Adjustment General SettingsChannel-Specific Settings Channel DesignationCommon to All Channels Page Camera Channel Designation Page Page Setting the System Clock SetPage Setting the Send E-Mail Page Page Network Type Ntsc PAL Operation Addition of sitesDelete of Sites Modify of SitesConnect Disconnect Page Page Playback of Recorded Video on Local PC Playback of Recorded Video on Remote DVR Page BACKUP. And then the window appears as below Page Network Access Using the 3G App Viewer