Speco Technologies 4HD manual Camera Channel Designation

Page 70

Sensor In: Outputs an alarm signal when the specified external sensor input terminal receives an input.

Motion On: Outputs an alarm signal when the specified video input terminal receives a motion detection signal.

Video Loss On: Outputs an alarm signal when a video loss occurs in the specified video input terminal.

Alarm Duration: Sets the duration of the alarm output signal

Error Alarm: Sets whether to output or not an alarm signal when the error condition occurs. (Options are OFF, ALL, HDD ERROR and VIDEO LOSS.)

Remote Controller: Sets an ID number on the supplied remote control for its identification.

Setting the PTZ Control: Sets the communication environment for remotely operating PTZ dome cameras connected to RS485 terminals.

Camera Channel Designation

Camera Speed: Sets the communication speed. The set value applies to all channels.

Protocol: Sets the protocol type for the specified channel. When connecting multiple cameras, set the same protocol for all.

Camera ID: Sets the camera ID.

70

Image 70

Contents Channel HDcctv Digital Video Recorder Model DVR4HDSafety Precautions These Precautions Must Be Followed For Safety Reasons Product Components Basic Function of the Mouse Page Specification SpecificationSpecifications are subject to change without notice Table of Contents 10-2-1 Name and Function Front PanelSelect VGA ConnectionVideo RSVSetting Up the DVR Setup Main Screen1. Setup Menu Tree Page Setup Display Mode Setup Recording ModePage 2. Schedule Recording Setup Screen Recording SchedulesSetup Device Mode Alarm OUTAlarm-Out PTZ SetupMotion Zone Setup 3. PTZ Control Setup ScreenSetup Storage Mode 4. Motion Zone Selection ScreenDisk Info 1. Menu Items in Storage Setup Screen DescriptionA.R.T Setup System Mode YYYY/MM/DD MM-DD-YYYY DD-MM-YYYYSend Mail SavingConnection Period 1~24 Setup, PlaybackPB, PTZ, Record OFFR/OFF, and Network Setup Security ModePassword Check User Password ADMIN, NETWORK, USER1, USER2, USER3Port number Default Setup Network ModeWeb Sever Port number Ports Network Access beyond RouterWeb Viewer Network Access Beyond Router Network Types StaticDhcp DdnsFollow settings such as Language, DVR ID, Security User Setup Config Mode1. Config Setup LoadSaving Setup Setup -QUICK Setup ModeLive Viewing Screen 1. Status Indicator Icons in Live ScreenLive, Search, and Playback Icon DescriptionSearch Screen ArchTime-Line Search 2. Time-Line SearchEvent Search 3. Event Search ScreenGo To Specific Time Go To First TimeGo To Last Time Log Search1. Button Functions in Play Mode Play modePLAY/PAUSE PTZ Control PTZ Autoscan2. Description of RS-485 Port Video Backup onto USB Flash Drive Still Image Backup onto USB Flash DriveBack Up Playback of Backup Video Transferring Still Images or Video from the Archive List1. HD Player Upgrading Firmware Installing the Network Software Network Access Using the Single-Site Network ViewerPC Requirements Live Monitoring Mode and Functions Date & Time Display ModeSetup CONNECT/DISCONNECTImage Capture of Live Screen Disconnect Remote Search Mode and FunctionsBi-Directional Audio LiveMark OUT Button Display ModeMark CalendarBackup of Video in the Remote DVR PC System Configuration Setting GeneralSetting Site Setting EventSetting Record Network Access Using the Multi-Sites Network Viewer Live Window Button DescriptionSite Management Connect Search and Playback Window Main control panel Event List Setup Miscellaneous Page Page Page Remote Setup Video Image Adjustment General SettingsChannel-Specific Settings Channel DesignationCommon to All Channels Page Camera Channel Designation Page Page Setting the System Clock SetPage Setting the Send E-Mail Page Page Network Type Ntsc PAL Operation Addition of sitesDelete of Sites Modify of SitesConnect Disconnect Page Page Playback of Recorded Video on Local PC Playback of Recorded Video on Remote DVR Page BACKUP. And then the window appears as below Page Network Access Using the 3G App Viewer