Audio: Sets whether to perform or not audio recording.
Post Event Record: Sets the duration of the event recording.
Schedule: Sets the schedule for schedule recording.
Select Device to set the sensor input/alarm output conditions, PTZ control and spot setting conditions.
Setting a Sensor Input Terminal: Specify a sensor input terminal number and set the type.
Setting the Motion Zone/Sensitivity: Select the zone where the motion sensor is active. It is necessary to set a detection frame when PARTIAL ZONE is selected. Select the level of detection sensitivity of the motion sensor. Sensitivity selections: 1~9(High sensitivity level)
Partial Zone: If selecting Partial Zone, a button is displayed to the right. Click the button and click(or drag)a grid cell in the desired detection frame.
Setting an Alarm Output Terminal: Specify an alarm output terminal number
Alarm Out No.: Specifies the alarm output terminal number
69