▼) and SEL button. Enter the current password and select OK. Enter the new password and select OK. Enter the same password again to confirm and select OK. Then the message “PASSWORD CHANGED” is displayed.
The factory default password is 1111.
3-8. Setup – Network Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select NETWORK icon and press SEL button to enter the setup menu item. Navigate through the menu items using the control button (◀ ▲ ▶ ▼) and change the value of the menu item using the control button (◀ ▲ ▶ ▼). To return to setup menu screen, press the ESC button
| Figure 3.8.1. NETWORK Setup Screen |
| Table 3.8.1. Menu Items in Network Setup Screen |
|
|
Item | Description |
|
|
PORT | Port number (Default: 5445) |
|
|
WEB PORT | Web Sever Port number |
NETWORK TYPE Select a type of network connection. Options are: DHCP and STATIC
Note. Other parts of the network setup screen change depending on what network type you select.
DHCP DVR automatically get IP varying from time to time from network and does not therefore need to be set.
28