Speco Technologies 4HD manual Setting the Send E-Mail

Page 75

Setting the Send E-Mail:

This setting is used to automatically send a notification e-mail to a specified address when an alarm occurs. (Memo: The DVR will be forcibly restarted if a value on this screen is changed.)

Send E-Mail: Sets whether to enable/disable e-mail sending function.

IP Notification: To send a notification e-mail when the DVR IP address is changed, check the checkbox.

Transmission Mode: Enables sending image of the channel that triggered the alarm when an alarm event is triggered.

Event Alarm: Sets whether to enable/disable sending e-mail reports on the channel that triggered the alarm when an alarm event is triggered.

Mail Address: Input the destination address.

Mail Server Name: Input the SMTP server name as well as the user ID and password.

Return Mail Address: Set the source e-mail address to be notified to the destination.

75

Image 75

Contents Model DVR4HD Channel HDcctv Digital Video RecorderSafety Precautions These Precautions Must Be Followed For Safety Reasons Product Components Basic Function of the Mouse Page Specification SpecificationSpecifications are subject to change without notice Table of Contents 10-2-1 Front Panel Name and FunctionSelect RSV ConnectionVideo VGASetup Main Screen Setting Up the DVR1. Setup Menu Tree Page Setup Recording Mode Setup Display ModePage Recording Schedules 2. Schedule Recording Setup ScreenAlarm OUT Setup Device ModePTZ Setup Alarm-Out3. PTZ Control Setup Screen Motion Zone Setup4. Motion Zone Selection Screen Setup Storage Mode1. Menu Items in Storage Setup Screen Description Disk InfoA.R.T YYYY/MM/DD MM-DD-YYYY DD-MM-YYYY Setup System ModeSaving Send MailConnection Period 1~24 User Password ADMIN, NETWORK, USER1, USER2, USER3 Setup Security ModePassword Check Setup, PlaybackPB, PTZ, Record OFFR/OFF, and NetworkSetup Network Mode Port number DefaultWeb Sever Port number Network Types Static Network Access beyond RouterWeb Viewer Network Access Beyond Router PortsDdns DhcpLoad Setup Config Mode1. Config Setup Follow settings such as Language, DVR ID, Security UserSetup -QUICK Setup Mode Saving SetupIcon Description 1. Status Indicator Icons in Live ScreenLive, Search, and Playback Live Viewing ScreenArch Search Screen2. Time-Line Search Time-Line Search3. Event Search Screen Event SearchLog Search Go To First TimeGo To Last Time Go To Specific TimePlay mode 1. Button Functions in Play ModePLAY/PAUSE PTZ Control Autoscan PTZ2. Description of RS-485 Port Still Image Backup onto USB Flash Drive Video Backup onto USB Flash DriveBack Up Transferring Still Images or Video from the Archive List Playback of Backup Video1. HD Player Upgrading Firmware Network Access Using the Single-Site Network Viewer Installing the Network SoftwarePC Requirements Live Monitoring Mode and Functions CONNECT/DISCONNECT Display ModeSetup Date & TimeImage Capture of Live Screen Live Remote Search Mode and FunctionsBi-Directional Audio DisconnectCalendar Button Display ModeMark Mark OUTBackup of Video in the Remote DVR Setting General PC System ConfigurationSetting Event Setting SiteSetting Record Network Access Using the Multi-Sites Network Viewer Button Description Live WindowSite Management Connect Search and Playback Window Main control panel Event List Setup Miscellaneous Page Page Page Remote Setup Channel Designation General SettingsChannel-Specific Settings Video Image AdjustmentCommon to All Channels Page Camera Channel Designation Page Page Clock Set Setting the SystemPage Setting the Send E-Mail Page Page Network Type Ntsc PAL Addition of sites OperationModify of Sites Delete of SitesConnect Disconnect Page Page Playback of Recorded Video on Local PC Playback of Recorded Video on Remote DVR Page BACKUP. And then the window appears as below Page Network Access Using the 3G App Viewer