Memorex URC 4880 manual Programming DVD Player Control, Setup Codes for Satellite Receivers, Hts

continued on next page...

PROGRAMMING CABLE CONVERTER OR SATELLITE RECEIVER CONTROL

Setup Codes for Cable Converters (Continued):

Samsung	0144, 0040
Scientific Atlanta	0008, 0477, 0017, 0877
Signal	0015, 0040
Signature	0011
Sprucer	0021
Starcom	0003, 0015
Stargate	0015, 0040, 0797
Starquest	0015
TV86	0063
Tandy	0258
Teleview	0040
Timeless	0418
Tocom	0012, 0013
Toshiba	0000
Tusa	0015
Unika	0153, 0022
United Artists	0007
Universal	0153, 0022, 0056, 0191
Viewstar	0063, 0258
Zenith	0000, 0525, 0899
Zentek	0400

Setup Codes for Satellite Receivers:

AlphaStar	0772
Echostar	0775, 1005
Expressvu	0775
General Instrument	0627, 0361, 0869
HTS	0775
Hitachi	0819
Hughes Network	0749
JVC	0775
Jerrold	0627, 0361
Magnavox	0724, 0722
Memorex	0724
Next Level	0869
Panasonic	0701
Philips	0724, 0722
Primestar	0627, 0361
RCA	0566, 0143, 0392, 0855
Radio Shack	0869
Sony	0639
Star Choice	0869
Toshiba	0790
Uniden	0724, 0722
Zenith	0856

PROGRAMMING DVD PLAYER CONTROL

Locate the brand name of your DVD (or LD) player in the Setup Codes For DVDs (or LDs) section on the next page, and write it in the following space.

DVD (or LD) Brand: __________________________

The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the One For All 4-Device Video Expert Plus With Learning remote control to operate your DVD (or LD) player:

1.Turn on your DVD (or LD) player.

2. On the remote control, press DVD once.

Press and hold SET until the LED blinks twice, then release SET.

3.Enter the first four-digit code for your DVD (or LD) player. If you perform this procedure cor- rectly, the LED will blink twice.

NOTE: If the LED did not blink twice after entering the code’s last digit, then repeat steps 2 through 3 and try entering the same code again.

4.Aim the remote control at your DVD (or LD) player and press POWER once. The unit should turn off. If your DVD (or LD) player remote control does not have a POWER key, press

PLAY. If the DVD (or LD) player does not respond, repeat steps 2-3, trying each code list- ed for your brand until you find one that works. If the DVD (or LD) player still does not work , try searching for the code (see Searching For Your Code on page 23).

5.Write your DVD (or LD) player code in the boxes below for future reference.

NOTE: Remember, to use the One For All 4-Device Video Expert Plus With Learning remote control to operate your DVD (or LD) player, press DVD first.

20 21