Memorex URC 4880 manual Setup Codes for TV/VCR Combos, Programming TV/VCR Combo Control

Page 9

PROGRAMMING TV/VCR COMBO CONTROL

Locate the brand name of your TV/VCR Combo in the Setup Codes For TV/VCR Combos section on the next page, and write it in the following space.

TV/VCR Combo Brand: ________________________

The brands are listed in alphabetical order with popular codes listed first.You will use one of these codes to pro- gram the One For All 4-Device Video Expert Plus With Learning remote control to operate your TV/VCR Combo:

1.Turn on your TV/VCR Combo and insert a video cassette.

2. On the remote control, press VCR once. Press and hold SET until the LED blinks twice, then release SET.

3.Enter the first four-digit code for your TV/VCR Combo. If you perform this procedure correctly, the LED will blink twice.

NOTE: If the LED did not blink twice after entering the code’s last digit, then repeat steps 2 through 3 and try entering the same code again.

4.Aim the remote control at your TV/VCR Combo and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, try- ing each code listed for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 23).

5.If you’ve located a TV/VCR setup code that works your TV/VCR Combo and a separate TV code is also listed,you’ll need to program this code into the remote control to access volume control (see Programming TV Control on page 8).

If there is no separate TV code listed, you will need to perform the following steps to access volume control:

a. Press and hold SET until the LED blinks twice, then release SET.

b. Enter 9 - 9 - 3. The LED will blink twice.

c. Press VCR once. The LED will blink twice.

6.Write your TV/VCR Combo code in the boxes below for future reference.

NOTE: Remember, to use the One For All 4-Device Video Expert Plus With Learning to operate your TV/VCR Combo, press VCR first.

Setup Codes for TV/VCR Combos:

Brocksonic

0002, 0479 (TV:0463)

 

Citizen

0278

 

 

Colt

0072

 

 

Curtis Mathes

0035

(TV:0051)

 

Daewoo

0278

(TV:0624)

 

Emerson

0002, 0479 (TV:0463), 0278 (TV:0624)

Funai

0000

 

 

GE

0060

(TV:0047), 0048

(TV:0093), 0035 (TV:0051), 0240

GoldStar

0037

(TV:0056)

 

Harley Davidson

0000

 

 

Hitachi

0000

 

 

Lloyd's

0000

 

 

Magnasonic

0278

 

 

Magnavox

0000, 0081 (TV:0054)

 

Magnin

0240

 

 

Memorex

1162, 1262, 0162 (TV:0250), 0037 (TV:0056), 1037

MGA

0240

 

 

Mitsubishi

0048

(TV:0093)

 

Optimus

1162, 1262, 0162 (TV:0250)

Orion

0002, 0479 (TV:0463)

 

Panasonic

1162, 1262, 0162 (TV:0250), 0035 (TV:0051)

Penney

0037

(TV:0056), 0035

(TV:0051), 0240

Quasar

0162

(TV:0250) , 0035 (TV:0051)

Radio Shack

1037

 

 

RCA

0060

(TV:0047), 0048

(TV:0093), 0035 (TV:0051), 0240

Sansui

0000, 0479 (TV:0463)

 

Sanyo

0240

 

 

Sears

0000, 0037 (TV:0056)

 

Sharp

0048

(TV:0093)

 

Sony

0032

(TV:0000)

 

Sylvania

0081

(TV:0054)

 

Symphonic

0000

 

 

Thomas

0000

 

 

White Westinghouse

0278

(TV:0624)

 

Zenith

0000, 0479 (TV:0463)

 

16

17

Image 9
Contents URC 4880 Video Expert Plus With Learning Introduction Table of ContentsFeatures and Functions Installing Batteries Key ChartsIf available Programming TV Control Setup Codes for TVsTV Brand Write your TV code in the boxes below for future reference KTV KEC LXI MGAProgramming VCR Control Setup Codes for VCRsVCR Brand Write your VCR code in the boxes below for future referenceSTS Programming TV/VCR Combo Control Setup Codes for TV/VCR CombosCable Converter Brand Satellite Receiver Brand Setup Codes for Cable ConvertersABC NSCProgramming DVD Player Control Setup Codes for Satellite ReceiversDVD or LD Brand HTSSetup Codes for LD Players Setup Codes for DVD PlayersSearching for Your Code Enter 9 9 1. The LED will blink twiceEnter 9 9 0. The LED will blink twice Checking the CodesPress CBL/SAT once Then release SETTo change Volume Lock to the CBL/SAT mode Changing Volume LockTo change Volume Lock to the VCR mode To change Volume Lock to the DVD modeUsing the Menu KEY Using KeymoverChanging Volume Lock Using Learning Keys Programming The L KeysDeleting Functions From The L Keys An Example Video Configuration StepLED will blink twice An Example Video Configuration TroubleshootingPart No. URC4880 Additional Information