USING LEARNING KEYS
Use the learning keys (L1, L2, L3, L4) to add functions that are unique to your home entertainment components (e.g., Tracking Up or Down for a VCR).
NOTE: Please have your original remote controls handy before programming learning. Be sure to press each key within 10 sec- onds of the previous entry. If not, the remote control will exit the programming mode.
Programming The L Keys
1. 
On the remote control, press and hold SET until the LED blinks twice, then release SET.
2.
Enter 9 - 7 - 5. The LED will blink twice.
3.Press the component key once in which you want to learn a feature (e.g., TV).
4. 
Press the L key once (e.g., L1) in which the new feature is to be learned. The LED will blink rapidly.
5.Place your original remote control head to head (about 2" apart) from the One For All
2"
trol.
6.On your original remote control, press and hold the key (i.e., feature) to be learned until the LED on the One For All
7.To learn functions on the other L keys, repeat steps 3 through 6.
8. 
To lock in new feature(s) on the One For All
30
9.To test a new feature, press the component key (e.g., TV) that was learned once.
Then press the L key (e.g., L1) where the com- ponent’s feature was learned.
Deleting Functions From The L Keys:
1. 
On the remote control, press and hold SET until the LED blinks twice, then release SET.
2.
Enter 9 - 7 - 6. The LED will blink twice.
3.Press the component key once where the learned feature to be deleted is stored (e.g., TV).
4. 
Press the L key (e.g., L1) to be deleted twice. The LED will blink twice after the second press.
5.To clear additional functions stored on other L keys, repeat steps 1 through 4.
31