Installing Batteries, Key Charts, If available

FEATURES AND FUNCTIONS

Key Charts (Continued)

Press PIP once to view or turn off the picture-in-picture feature.

Press SWAP once to exchange the PIP with the main TV picture.

Use MOVE to the picture-in-picture position on the TV screen.

Press SLEEP once to enable (or disable) a selected component’s sleep timer

(if available).

Use DISPLAY to view a selected component’s information on the TV.

Use the keypad (0 ~ 9) to directly select channels (e.g., 09 or 31).

Press ENTER once after entering channel numbers on some TV models.

Press PREV.CH once to recall the last-viewed channel.

Use V.CONFIG to custom program and recall video configuration modes for home theater use. Also see page 32.

In the TV, DVD, or VCR mode, use the FWD SCAN, REW SCAN, PLAY, STOP, and PAUSE keys to control your VCR or DVD (or LD) player. To record a program on, the VCR, press REC twice.

INSTALLING BATTERIES

❶

❷

❸

1.On the back of the remote control, press the recess and slide the battery cover off (see above).

2.Obtain two (2) fully-charged AA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries.

3.Align the cover keys with the case openings and slide the cover on until it locks.

4.Test the unit by pressing POWER and any mode key (e.g. TV, DVD, VCR, or CBL/SAT). If batteries are inserted correctly, the LED will blink once.

NOTE: When batteries need replacement, the One For All

4-Device Video Expert Plus remote control will cease to operate. Simply replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.