Memorex URC 4880 manual Features and Functions

Page 3

FEATURES AND FUNCTIONS

Key Charts

Use the illustration below to locate One ForAll 4-DeviceVideo Expert Plus With Learning remote control features and then study the Key Charts (on the next two pages) to learn how they function.

Use SET for all programming sequences.

The LED (red light) blinks to show that the remote control is working and is sending signals.

Use M.POWER to set up and turn on (or off) all TV,VCR, and DVD components with a single key.Also see page 25.

Press POWER once to turn on (or off) a selected home entertainment component.

Press TV, DVD, VCR, or CBL/SAT once to select a home entertainment video component to control.

Use the learning keys, L1, L2, L3, or L4, to store and recall additional remote control functions. Also see page 30.

Use EXIT to exit out of your cable converter’s menu and guide.

Press MENU once to display the selected component’s screen menu. Use the VOL +/- and CH +/- keys to navigate menus and press the MUTE key to select items.

Press TV/VID to switch viewing between TV and video sources.

Use VOL + (or VOL -) to raise (or lower) the sound volume.

Use CH + (or CH -) to select the next higher (or lower) channel.

Press MUTE/SELECT once to turn sound off or on. Also, use MUTE/SELECT to select items from the selected component’s screen menu after pressing MENU once.

After pressing MENU, use the Cursor Keys to move the cursor in the program guide and menu screens.

continued on next page...

4

5

Image 3
Contents URC 4880 Video Expert Plus With Learning Introduction Table of ContentsFeatures and Functions Installing Batteries Key ChartsIf available Write your TV code in the boxes below for future reference Setup Codes for TVsProgramming TV Control TV BrandMGA KECKTV LXIWrite your VCR code in the boxes below for future reference Setup Codes for VCRsProgramming VCR Control VCR BrandSTS Programming TV/VCR Combo Control Setup Codes for TV/VCR CombosNSC Setup Codes for Cable ConvertersCable Converter Brand Satellite Receiver Brand ABCHTS Setup Codes for Satellite ReceiversProgramming DVD Player Control DVD or LD BrandEnter 9 9 1. The LED will blink twice Setup Codes for DVD PlayersSetup Codes for LD Players Searching for Your CodeThen release SET Checking the CodesEnter 9 9 0. The LED will blink twice Press CBL/SAT onceTo change Volume Lock to the DVD mode Changing Volume LockTo change Volume Lock to the CBL/SAT mode To change Volume Lock to the VCR modeUsing the Menu KEY Using KeymoverChanging Volume Lock Using Learning Keys Programming The L KeysDeleting Functions From The L Keys An Example Video Configuration StepLED will blink twice An Example Video Configuration TroubleshootingPart No. URC4880 Additional Information