Memorex DT1900-C ANTENNA/CATV Connections, AUDIO/VIDEO Jack Connections, TV/AV Selection, Video

Page 6

ANTENNA/CATV CONNECTIONS

Combination UHF/VHF Antenna

Single 75 ohm Cable

300 ohm Twin-lead Wire

Take off the Splitter

Splitter

UHF Antenna

300-75 ohm

 

Matching Transformer

300 ohm Twin-lead Wire

(not supplied)

VHF Antenna

Single 75 ohm Cable

300 ohm Twin-lead Wire

 

Combiner

 

 

 

300-75 ohm

(not supplied)

Incoming CABLE TV

 

Matching Transformer

 

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿(not￿￿￿supplied)

 

 

 

This television has an extended

 

 

tuning range and can tune most

 

 

cable channels without using a

 

 

cable company supplied

 

 

converter box. Some cable

 

 

companies offer “premium pay

 

 

channels” in which the signal is

 

 

scrambled. Descrambling these

VIDEO

 

signals for normal viewing

L

 

requires the use of a descrambler

LINE 1

 

AUDIO (MONO)

 

 

R

UHF/VHF

 

 

 

device which is generally

 

 

provided by the cable company.

Separate UHF/VHF Antennas

Connect the 75 ohm Cable from the VHF antenna and the UHF antenna Twin-lead to a combiner (not supplied). Attach the Combiner to the Antenna Jack.

NOTE: If your VHF antenna has a Twin-lead Wire, use the 300-75 ohm Matching Transformer (not supplied), then connect the Transformer to the Combiner.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box, connect the CABLE TV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service which requires the use of a Converter/Descrambler box, connect the incoming cable to the Converter/Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown left. Set the television to the output of the Converter/ Descrambler box (usually channel 3 or 4) and use the Converter/ Descrambler box to select channels.

Combination UHF/VHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

Connect the 75 ohm cable from a combination UHF/VHF antenna to the Antenna Jack. If your combination antenna has a 300 ohm Twin- lead Wire, use the 300-75 ohm Matching Transformer (not supplied).

Combination UHF/VHF Antenna (Separate VHF and UHF 300 ohm Twin-leads)

Connect the UHF Twin-lead Wire to a Combiner (not supplied). Connect the VHF Twin-lead to the 300-75 ohm Matching Transformer (not supplied). Attach the Transformer to the Combiner. Attach the Combiner to the Antenna Jack.

For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/B Switch box from the cable installer or an electronics supply store. Follow the connections shown left. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the Converter/ Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels.

AUDIO/VIDEO JACK CONNECTIONS

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only.

Press the VIDEO button or TV/AV button on the unit to select the AV mode to use the TV as a monitor.

This TV is designed to output stereo sound (audio signal from AUDIO L/R) ONLY when using the AUDIO IN Jacks on either the front or the back of the unit.

TV/AV SELECTION

 

2. To connect the TV to a Video Game System

If you connect the TV to a VCR or DVD for playback, or if you

 

The TV can also be used as a display device for many video

connect a camcorder or Video Game System, you can make your

games. However, due to the wide variety of different types of

selection by pressing the VIDEO (or TV/AV) button.

 

signal generated by these devices and subsequent hook-up

Press the VIDEO (or TV/AV) button repeatedly to select the

 

variations required, they have not all been included in the

 

suggested connection diagrams. You'll need to consult each

desired mode.

 

 

 

 

 

 

component's Owner's Manual for additional information.

“VIDEO 1” or “VIDEO 2”

will display on the screen for 4 seconds.

 

 

 

 

 

To Audio/Video OUT

Front of TV

TV

VIDEO 1

VIDEO 2

 

 

 

 

 

Video Game System

 

 

 

 

 

 

 

1. To connect the TV to a VCR

 

 

(not supplied)

 

VCR

 

 

 

 

Rear of TV 3. To connect the TV to the Camcorder

 

 

 

 

VIDEO

 

To playback from the camcorder, connect the camcorder to the

 

 

 

TV as shown.

Front of TV

 

 

 

 

 

 

L

VIDEO

 

 

To Audio/Video

 

AUDIO (MONO)

 

 

OUT

 

R

AUDIO (L)

 

 

 

 

 

 

 

 

LINE 1

AUDIO (R)

To AV OUT jack

 

6

(not supplied)

 

 

 

 

 

 

 

 

 

(not supplied)

Image 6
Contents LSLPZVYLZLYVKL W\SNHKHZ Power Source CleaningAccessories POWER-CORD ProtectionReplacement Parts Power LinesDamage Requiring Service Safety CheckFront Back FeaturesLocation of Controls 12 13Battery Precautions Remote ControlHOW to Install Batteries ChannelTV/AV Selection ANTENNA/CATV ConnectionsAUDIO/VIDEO Jack Connections VideoCable TV Mode Direct Channel Selection Setting LanguageTV Mode Direct Channel Selection TV OperationAutomatic Channel Memory To Memorize ChannelsTV/CABLE Selection To ADD/DELETE ChannelsSetting V-CHIP TV RatingMovie Rating To Return to Initial Setting Adjusting PictureTo Select Caption Mode Closed CaptionTroubleshooting Guide SpecificationsSymptoms Possible Solutions Españ OL NotaInstalacion EN Pared O Techo Delantera Trasera CaracteristicasUbicacion DE LOS Controles 11 12 13Control Remoto Como Instalar LAS PilasPrecauciones Para LAS Pilas Conexiones DE Antena Divisor Desmonte el divisor Antenas de UHFAjuste DE Lengua Operacion DEL TelevisorNota Memoria Automatica DE Canal Para Memorizar CanalesSeleccion DE TV/CABLE Para AÑ ADIR/BORRAR CanalesProhibicion DE Peliculas Seleccion DE ChipProhibicion DE TV NotasPara Seleccionar EL Modo DE Subtítulos Subtítulo CerradoAjuste DE Imagen Para Volver AL Ajuste InicialSintoma Posible Solucion EspecificacionesAntes DE Solicitar Servicio VHF UHF TV CableLisez LES Instructions AccessoiresEmplacement DE Lappareil Conservez CES InstructionsLignes DE Haute Tension Service OU RÉ ParationOrage É Lectrique SurchargeEmplacement DES Commandes Caracté RistiquesVUE Avant VUE Arriere TÉ LÉ Commande Insertion DES PilesRaccordement DES Antennes Raccordement DE LA Prise AUDIO/VIDÉ OSÉ Lection TV/AV Choix DE LA Langue Fonctionnement DU TÉ LÉ ViseurRemarque Syntonisation Automatique DES Canaux Mise EN MÉ Moire DES CanauxSÉ Lection TV/CABLE Pour AJOUTER/EFFACER DES Canaux DE LA MÉ MoireNiveau DUN Film Utilisation DE LA PuceNiveau DE TÉ LÉ Vision RemarquesRÉ Glage DE Limage Selectionner LE Mode CaptureSOUS-TITRAGE Pour Revenir AUX RÉ Glages InitiauxFiche Technique AccessoiresProblè MES Solutions Possibles Guide DE DÉ Pistage DES Pannes04/08 U