Memorex DT1900-C manual To Memorize Channels, TV/CABLE Selection, Automatic Channel Memory

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting.

TV/CABLE SELECTION

1 Press the MENU button.

2 Press the or button to select “CH SETUP”,then press the

button.

3 Press the or button to select “TV/CABLE”.

4 Press the button to select “TV” or “CABLE” mode. The arrow indicates the selected mode.

5 Press the MENU button to return to normal TV viewing.

The chart below is typical of many cable system channel

AUTOMATIC CHANNEL MEMORY

1	Press the MENU button.
2	Press the	or	to select “CH
	SETUP”, then press the		button.
3	Press the	or	button to
	select “AUTO CH MEMORY”, then
	press the	button. The TV will begin
	memorizing all the channels available
	in your area.
4	Press the MENU button to return to normal TV viewing.

TO ADD/DELETE CHANNELS

1	Press the MENU button.
2	Press the	or	button to
	select “CH SETUP”,then press the
	button.
3	Press the	or	button to

select “ADD/DELETE”, then press the button.

allocations￿￿,**)12,&'()*,￿--30￿￿.-/014￿￿￿￿￿￿￿.￿￿5/6--￿)7				￿	!	￿￿￿￿ ￿ ￿ ￿￿￿		￿ ￿ ￿￿	￿	4
CABLE TV CHART				￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿	!!	￿￿￿￿￿￿￿￿￿	￿￿￿	5
!!!￿%￿￿%￿	￿%￿	￿%￿	￿￿%￿￿￿￿￿"""###$$$
￿￿￿￿￿￿	￿￿￿	￿￿￿	￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿￿

NOTE: Contact your cable company to determine the type of cable system used in your area.

6

Select the desired channels to be added or deleted using the Direct Channel Selection buttons (10 keys,

0-9) or the or button.

Press the or button to select ADD or DELETE. If an unmemorized channel was selected (step 4), the channel indication will be blue. Press the button if you wish to ADD the unmemorized channel. The channel indicator will change from blue to pink when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the channel indication will be pink.

Press the or button if you wish to DELETE the channel from memory. The channel indicator will change from pink to blue when a channel is deleted.

Repeat Steps 4 and 5 for each channel to be added or deleted.

Press the MENU button after adding or deleting all of the desired channels, to return to normal TV viewing.

8