Magnavox VRX562AT99 warranty Recording, Press the VCR button on the remote control

Page 31

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (see page five) in the VCR. The power will come on, and the Cassette-Inside light will appear.

3

Press the VCR button on the remote control.

4

If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

5

Press the (Tape) SPEED button on the remote control until the desired tape speed (see page 36) appears on the TV screen. The tape speed will disappear from the screen after about five seconds.

6

Use the CH(annel) Up/Down buttons or the Number but- tons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording.

8

To pause the recording (for example, during commer- cials), press the PAUSE/STILL button once. To start recording again, press the REC(ord)/OTR button or the PAUSE/STILL button again.

9

To stop recording, press the STOP button.

Recording 31

1Turn on the TV.

2Insert a tape in the VCR.

3	CBL/DSS			VCR	TV
	PAUSE		POWER		VCR PLUS+
	/STILL				/ENTER
8						9
	SLOW				F.ADV
	STATUS/EXIT		MENU		CLEAR
	V				C
			VOL	CH		6
	V				C
	1			2	3
	4			5	6
7	7			8	9	4
	100			0	A.CH
	REC/OTR		INDEX	SKIP
	REC/OTR	SEARCH		SEARCH	VCR/TV
5	SPEED	MEMORY
	EJECT	X2 PLAY		VAR.SLOW	TRACKING
	MUTE			TIME SEARCH REC END SEARCH

JOG & SHUTTLE

Helpful Hints

•If the REC(ord)/OTR button is pressed when there is not a tape in the VCR, NO CASSETTE will flash on-screen.

•If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on-screen.

•Other recording options are on pages 32 - 44.

•You can change the tape speed while the VCR is recording, but some distortion will appear on the tape.

•The VCR will record in a preset vol- ume.

Image 31

Contents VRX562AT For Customer Use Dear Philips Magnavox product ownerSafety Precautions FeaturesIntroduction Table of Contents Erasure Prevention Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable BoxPlug in the TV and the VCR Hookups Without a Cable Box cont’dWatching TV With the VCR Off Timer RecordingsHookups With a Cable Box/DSS Receiver Recording/Viewing Any ChannelPress the Play button to play the tape Hookups With a Cable Box/DSS Receiver cont’dRecording One Channel/Watching Another Playing a TapeHookups With a Stereo TV 1Turn on the TV Turning on Your VCRPress the VCR button Press the Number 3 button to select Tuner SET UPChannel Memory Programming ChannelsUse the Number buttons to enter the channel number Channel Memory cont’dAdding/Deleting Channels Reviewing Programmed ChannelsPress the Number 2 button to select SET Manual Clock Setting the ClockManual Clock Setting Press the Number 4 button to select SET ClockSetting the Clock cont’d Bring up the main menu display Setting the Clock cont’dAutomatic Clock Setting Press the VCR button, then press the Menu button toPress the Number 4 button to select SET Time Zone Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionPress the Number 4 button to select Language Press the Number 2 button to select VCR SET UPLanguage Selection Language Selection2Find your TV code Press and release the Mute button2System code Find your Cable Box/SatellitePress the Mute button, then the PAUSE/STILL button If another remote control beepsRemote Locator Letting your VCR find your remote for youRewind Button CBL/DSS ButtonVCR Button TV ButtonRemote Control Buttons cont’d Frame. ADVance Button Slow ButtonStop Button Menu ButtonPressed Press the Number 2 button to select on Screen ModeOn-Screen Status Displays To choose the status display mode, follow the steps belowVCR Display Panel Feature Light SymbolsFront Panel Rear Panel Read and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape in the VCR Recording Press the VCR button on the remote controlPress the TV button, then press the CHannel Up/Down Press the VCR button Start a recording seePress the Stop button to stop the recording One Touch Recording Recording Menu Timer RecordingPress the Number 1 button to select Program DailyEnter the recording’s stop time Enter the channel you want to recordPress the STATUS/EXIT button. Program WAS COM Timer Recording cont’dTape Speeds Menu button Press the Number 1 button to select Program Checking or Cancelling Timer RecordingsSee page 58 for more hints Cable Box Cable Box Transmitters on VCR Find your Cable Box code Turn on the Cable BoxSetting Up the Cable Box Controller cont’d TV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Press the Number 5 button to select VCR PLUS+ REF. MAP Examine the lists onPress the VCR PLUS+ /ENTER button on the remote con OnceComplete each step within 60 seconds of completing Previous step. If you don’t, you may return to stepTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchExample Index SearchSkip Search Record End SearchDuring tape playback press the Skip Search button Real Time Counter Memory Real Time Counter MemoryPlaying a Tape at Double Speed Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPPlay button or press the Slow button again Press the Play button to release the Still modeViewing a Slow Motion Picture Viewing a Picture in Slow to Fast MotionAutomatic Rewind, Eject, Off Automatic Operation FeaturesMemory Rewind, Power Off Automatic PlaybackAutomatic Tracking Adjustment Automatic Operation Features cont’dManual Tracking Monitor MTS Broadcast Stereo SystemUnderstanding On-Screen Displays Specifically…To the right of your selection MTS Broadcast Stereo System cont’dPress the Number 3 button to select Audio OUT Hi-Fi Stereo Sound SystemAdditional hints are on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Cable Box/DSS Receiver Output Channel Channel 03 or GlossarySpecifications Renewed Index Supplied Accessories