Hookups With a Cable Box/DSS Receiver (cont’d) 9
This connection allows you to program an unattended recording of more than one unscram- bled channel and to watch one channel while recording another. After you connect the VCR, Cable Box/DSS Receiver, and TV as shown below, the features on this page will be available.
1.Connect a Cable signal to the VCR’s ANT(enna) IN Jack.
AUDIO | ANT | |
IN | ||
| L |
|
| R |
|
VIDEO | OUT | |
OUT | IN CH3 | CH4 |
2.Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DSS Receiver.
TV ANTENNA IN Jack
3.Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DSS Receiver to the ANTENNA IN Jack on the back of the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DSS Receiver on the same channel as the VCR’s CH3/CH4 switch. Put the TV on the same channel. With the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) Up/Down buttons at the VCR to select the channel you want to record. Start the recording.
2
Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)
3
Use the TV channel selector to put the TV on the Cable
Box/DSS Receiver output channel (channel 03 or 04).
4
Select the channel you want to watch at the Cable Box/DSS Receiver.
Playing a Tape
1
Press the VCR/TV button to put the VCR in VCR position (the VCR light will appear on the display panel).
2
Make sure the Cable Box/DSS Receiver is on the same channel as the VCR’s CH3/CH4 switch.
3
Use the TV channel selector to put the TV on the same chan- nel.
4
Helpful Hint
•You cannot record scrambled chan- nels with this connection.