Magnavox VRX562AT99 warranty Glossary, Cable Box/DSS Receiver Output Channel Channel 03 or

Page 60

60 Glossary

AUDIO IN/OUT Jacks: jacks located on the front and back of the VCR which are used to record audio from another source (IN) or to send audio to another source (OUT).

Automatic Channel Programming: process in which the VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CH(annel) Up/Down buttons, you only scan through channels you receive.

Bands: settings that allow you to tune channels.

•Antenna – VHF (very high frequency; channels 2 - 13) and UHF (ultra high frequency; channels 14 - 69).

•Cable – all standard channels can be received without a Cable Box.

Cable Box/DSS Receiver Output Channel: Channel 03 or

04.

Dubbing: copying a tape using a second VCR.

Frame: a single still picture.

HQ: high quality; a feature in the VCR circuitry which provides enhanced picture detail.

Line Input: The channel to which you set your VCR during dub- bing. The line input channel is always channel 001 (AV REAR) or 002 (AV FRONT).

If you accidentally enter Line Input mode (AV REAR or AV FRONT will appear on your TV screen briefly), press the CH(annel) Up/Down buttons or use the Number buttons to select another channel.

Mode: a VCR operation.

OTR: one touch recording; programming a timed recording that starts immediately and records for 30 minutes to eight hours, whichever you specify.

Remote Control: the small electronic unit that came with your VCR; allows you to operate your VCR from a distance. You may be able to operate your TV, Cable Box or Digital Satellite System with the remote control.

RF coaxial cable: The cable supplied with your VCR. Use it to connect your VCR to your TV (or Cable Box/DSS Receiver, if applicable). The supplied cable is a snap-on type. However, you may also use a screw-on type if you prefer.

Special Effects: forward and reverse searching; viewing a still picture; slow motion.

Tape Speeds: how fast the tape travels during a recording or playback.

•SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours); best picture quality.

•LP (long play) – average tape speed (recording time for a T120 tape is approximately four hours).

•SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).

VCR: video cassette recorder.

VIDEO IN/OUT Jacks: jacks located on the front and back of the VCR which are used to record video from another source (IN) or send video to another source (OUT).

Page 59 Page 61
Image 60
Page 59 Page 61
Contents VRX562AT Dear Philips Magnavox product owner For Customer UseFeatures Safety PrecautionsIntroduction Table of Contents Putting Batteries in the Remote Control Using the Remote ControlVCR maintenance Erasure PreventionHookups Without a Cable Box Disconnect the antenna or cable from your TVHookups Without a Cable Box cont’d Plug in the TV and the VCRTimer Recordings Hookups With a Cable Box/DSS ReceiverRecording/Viewing Any Channel Watching TV With the VCR OffHookups With a Cable Box/DSS Receiver cont’d Recording One Channel/Watching AnotherPlaying a Tape Press the Play button to play the tapeHookups With a Stereo TV Turning on Your VCR 1Turn on the TVPress the Number 3 button to select Tuner SET UP Channel MemoryProgramming Channels Press the VCR buttonChannel Memory cont’d Adding/Deleting ChannelsReviewing Programmed Channels Use the Number buttons to enter the channel numberSetting the Clock Manual Clock SettingPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual ClockSetting the Clock cont’d Setting the Clock cont’d Automatic Clock SettingPress the VCR button, then press the Menu button to Bring up the main menu displayTime Zone Press the Number 4 button to select SET Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionPress the Number 2 button to select VCR SET UP Language SelectionLanguage Selection Press the Number 4 button to select LanguagePress and release the Mute button 2Find your TV codeFind your Cable Box/Satellite 2System codeIf another remote control beeps Remote LocatorLetting your VCR find your remote for you Press the Mute button, then the PAUSE/STILL buttonCBL/DSS Button VCR ButtonTV Button Rewind ButtonRemote Control Buttons cont’d Slow Button Stop ButtonMenu Button Frame. ADVance ButtonPress the Number 2 button to select on Screen Mode On-Screen Status DisplaysTo choose the status display mode, follow the steps below PressedFeature Light Symbols VCR Display PanelFront Panel Rear Panel Playing Read and follow the steps below to play a tape1Turn on the TV 2Insert a tape in the VCR Press the VCR button on the remote control RecordingPress the VCR button Start a recording see Press the TV button, then press the CHannel Up/DownPress the Stop button to stop the recording One Touch Recording Timer Recording Press the Number 1 button to select ProgramDaily Recording MenuEnter the channel you want to record Enter the recording’s stop timeTimer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings Menu button Press the Number 1 button to select ProgramSee page 58 for more hints Find your Cable Box code Turn on the Cable Box Cable Box Cable Box Transmitters on VCRSetting Up the Cable Box Controller cont’d Setting Up the VCR Plus+ Programming System TV Channels Cable ChannelsLocal TV Stations Call letters Examine the lists on Press the Number 5 button to select VCR PLUS+ REF. MAPOnce Complete each step within 60 seconds of completingPrevious step. If you don’t, you may return to step Press the VCR PLUS+ /ENTER button on the remote conTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchIndex Search ExampleRecord End Search Skip SearchDuring tape playback press the Skip Search button Real Time Counter Memory Real Time Counter MemorySpecial Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Playing a Tape at Double SpeedPress the Play button to release the Still mode Viewing a Slow Motion PictureViewing a Picture in Slow to Fast Motion Play button or press the Slow button againAutomatic Operation Features Memory Rewind, Power OffAutomatic Playback Automatic Rewind, Eject, OffAutomatic Operation Features cont’d Automatic Tracking AdjustmentManual Tracking MTS Broadcast Stereo System Understanding On-Screen DisplaysSpecifically… MonitorMTS Broadcast Stereo System cont’d To the right of your selectionHi-Fi Stereo Sound System Press the Number 3 button to select Audio OUTAdditional hints are on Hi-Fi Stereo Sound System cont’d Helpful Hints Helpful Hints cont’d Glossary Cable Box/DSS Receiver Output Channel Channel 03 orSpecifications Renewed Index Supplied Accessories
Top Page Image Contents