Playing Discs
Creating your own setting
1Press the VIDEO ADJ. button on the re- mote control.
2 Select “Setup” and then press ENTER.
Video Adjustment
Memory Select | Standard |
| Setup |
3Use the cursor buttons (2/3) to select a
Memory (Memory 1, 2, 3) to change/store a picture quality parameter.
|
| Video Adjustment | ||
|
|
|
|
|
Recall Settings |
| Memory 1 | ||
Progressive Motion |
| Auto 1 | ||
DNR | min |
|
| max |
|
| |||
CNR | min |
|
| max |
|
| |||
Sharpness High | soft |
|
| sharp |
|
| |||
Sharpness Mid | soft |
|
| sharp |
|
| |||
Detail | soft |
|
| sharp |
|
| |||
Brightness | min |
|
| max |
|
| |||
Move : | Enter |
|
|
|
4Use the cursor buttons (5/∞) to select a picture quality parameter, then use the cursor buttons (2/3) to adjust that parameter.
|
| Video Adjustment | |||
|
|
|
|
|
|
Contrast | min |
|
|
| max |
Chroma Level | min |
|
|
| max |
|
|
| |||
Hue | green |
|
|
| red |
|
|
| |||
Chroma Delay | - |
|
|
| + |
|
| ||||
Gamma | - |
|
|
| + |
Black Setup |
| 0.0 IRE | |||
Initialize |
| Off | |||
Move : | Enter |
|
|
|
|
•Progressive Motion – When using progressive scan, this adjusts the motion and still picture quality. There are two modes: Auto and Video. In Auto mode, the player automatically distin- guishes
Auto 1: Standard setting
Auto 2: Setting for moving images
Auto 3: Setting for still images
Video 1: Standard setting
Video 2: Setting for moving images
Video 3: Setting for still images
•DNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component
•CNR – Adjusts the amount of noise reduction (NR) applied to the C (color) component
•Sharpness High – Adjusts the sharpness of the
•Sharpness Mid – Adjusts the sharpness of the
•Detail – Adjusts how sharp edges appear in the picture
•Brightness – Adjusts the image brightness
•Contrast – Adjusts the image contrast
•Chroma Level – Adjusts how saturated colors appear
•Hue – Adjusts the overall color balance between red and green
•Chroma Delay – Compensates for misalign- ment of the Y (brightness) and the C (color) components
•Gamma – Adjusts the brightness of the darker images in the picture
•Black Setup – Corrects floating black color
•Initialize – Returns to the default values
5Press ENTER to save your changes. 
Note
•Pressing DISPLAY while the VIDEO ADJUST- MENT screen is displayed shows one adjust- ment item, as given below, so that you can adjust the item while confirming its effect. Pressing DISPLAY again returns to the former setting.
•Chroma Delay will not operate in Composite Video out, S2 Video out and COMPONENT Video out when Interlace is selected.
5
English
29