Marantz DV7600 manual PCM Down Sample, Default setting On

6DVD Setup Menu

PCM Down Sample*

• Default setting: On

If the digital input of your AV amplifier (or other connected component) is compatible with high sampling rates (96kHz), set this to Off, otherwise set it to On (96kHz audio is converted to a more compatible 48kHz). Check the manual that came with the other component if you’re unsure whether it is 96kHz compatible.

Note

•Even when set to Off, some discs will only output down sampled audio (48kHz/44.1kHz) through the digital outputs. High sampling rate DVD-Audio discs (192kHz or 176.4kHz) always output audio down sampled to 96kHz or 44.1kHz through the digital outputs.

PCM Down Sample

			PCM Down Sample OFF
	Audio recording format				ON
			Copyright protected	Not copyright protected
		48kHz	No output produced*1	48kHz	48kHz
DVD-Video	PCM
		96kHz	No output produced	96kHz	48kHz
		44.1kHz	No output produced*2	44.1kHz	44.1kHz
		48kHz	No output produced*1	48kHz	48kHz
		88.2kHz	No output produced	44.1kHz	44.1kHz
DVD-Audio	PCM
		96kHz	No output produced	96kHz	48kHz
		176.4kHz	No output produced	44.1kHz	44.1kHz
		192kHz	No output produced	96kHz	48kHz
Video CD		MPEG1	44.1kHz		44.1kHz
Audio CD		44.1kHz	44.1kHz		44.1kHz
MP3 CD	MP3 (MPEG-1 Audio Layer 3)		44.1, 48kHz		44.1, 48kHz
Super	DSD (Direct Stream Digital)		No output produced*3		No output produced*3
Audio CD

*1: Output will be produced from 48kHz/16-bit source.

*2: Output will be produced from 44.1kHz/16-bit source.

*3: Output will consist of 44.1kHz linear PCM output when replaying CD layer.

•When digital output is turned off, no digital audio data will be output from the digital audio output terminal (see page 39).

40