Marantz DV7600 manual Components Out, Compatibility of this unit with progressive-scan TVs

Page 36

6DVD Setup Menu

Components Out

• Default setting: Interlace

Compared to a standard interlaced TV picture, a progressive scan TV is capable of stable, flicker- free images.

Set only if you connected the COMPONENT VIDEO OUT to a progressive scan-compatible TV or monitor.

•Progressive – Use this setting with TVs and monitors that have progressive scan component video inputs. Check the TV’s instruction manual if you are not sure about this.

•Interlace – Use this setting with regular TVs that are not compatible with progressive scan. Check the TV’s instruction manual if you are not sure about this.

Tip

If this player is set to output progressive-scan video, it’s possible that the picture will appear stretched when playing discs recorded in 4:3 format. This happens when the TV’s aspect ratio is set to ‘Full’. To see the picture in its correct aspect ratio, change the TV setting to ‘Normal’.

If your TV doesn’t have settings to change the aspect ratio of the picture, set this player to 16:9 Squeeze.

Note

•If you connect a TV that is not compatible with a progressive scan signal and choose one of the progressive scan settings, you will not be able to see any picture at all. With your TV con- nected using either the composite or S-Video terminals, choose the Interlace setting in the Component Video menu.

•Compatibility of this unit with progressive-scan TVs:

Note that not all high definition television sets are fully compatible with this unit and may cause artifacts to be displayed in the picture. In case of progressive scan picture problems, try switching the connection to the “STANDARD DEFINITION” output.

SCART Video Out (Europe Model only)

• Default setting: Video

These settings are only applicable if you’re using the A/V EURO CONNECTOR SCART-type connector.

Important

If you make a setting here that is incompatible with your TV, the TV may not display any picture at all. If this happens either switch everything off and reconnect to the TV using either the supplied composite video cable, or an S-Video cable (see pages 10-11for more on this), or reset the unit (see page 47 for how to do this).

•Video – Compatible with all TVs, but lowest quality of the three AV settings.

•S-Video– Almost the same quality as RGB, but can give better results if you are using a long SCART cable.

•RGB – If your TV is compatible, this setting gives the best picture quality.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Model DV7600 User Guide Laser Safety Important Safety Instructions CE marking for Europe only Table Of Contents Features Before You StartPutting the batteries in the remote control Using the remote controlWhat’s in the box Close the coverDiscs compatible with this player DVD-Video regions MP3 compatibility informationConnecting Up Easy setupConnecting audio/video cables Connecting system control cablesConnecting Hdmi cables To the A/V Euro Connector onHome theater video connections Video or composite video?Connecting analog audio cables Connecting optical cablesConnecting coaxial cables Home theater audio connectionsControls & Displays Front panelProg Lights when replaying a program DisplayCharacter display Depending on the disc, the Down MIX is not displayedRemote control Video ON/OFF press to turn videoOutput off and on +10 button is not used on this setGetting Started Basic playback controlsPlaying discs Navigating DVD disc menus Navigating Video CD PBC menusSome discs don’t allow PBC menus Press the Search button during playback mode Playing DiscsIntroduction Finding what you want on a discStop mode of DVD ExamplePress 3PLAY button or the Enter button. Note Viewing a Pausing Picture Still Frame/Slow Play/Frame Advance PlaybackViewing slow playback Step Motion playback Viewing one frame at a timeUsing Using the Random PlayPress Random button during playback TipUsing the Repeat Play Press Repeat during playback to select a repeat modeLooping a section of a disc To resume normal playback, press A-B again. NoteSwitching Super Audio CD Mode Switching Camera AnglesSwitching Subtitle Language To switch the camera angle, press ANGLE. NoteSwitching Audio Language Using the Zoom FunctionSwitching audio channel To switch the audio channel, press Audio repeatedlyDisplay on the front panel change as follows Only Single Elapsed time is displayedMaking a program list Using Random Play Using Repeat PlayPlaying MP3s Video Adjust Selecting a presetPlaying Jpeg Play button or Enter buttonCreating your own setting Use the cursor buttons 2/3 to select aPress Enter to save your changes. Note DVD Setup Menu Using the FL menuUsing the Setup Menu Mode or Stop modeVideo Speaker*Hdmi SP LevelSetting up the Video Setup TV AspectWhen viewing on a widescreen TV or monitor Slide show Mode TV SystemAngle Mark Default setting Video Components OutCompatibility of this unit with progressive-scan TVs Setting up the Hdmi Setup ResolutionFormat Setup Examples AudioHdmi Audio Output Select one of the above with the Enter buttonSetting up the Audio Setup Default setting PCMDigital Out Mpeg OutDefault setting On PCM Down SamplePCM Down Sample Default setting 2 Channel Stereo Audio OutSRS TruSurround Default setting Off Audio DRCAbout source audio output RememberSetting up the Speaker Setup Default setting 10 ft/3.0 mSize DistanceSetting up the SP Level Setup Setting up the Disc SetupLanguage settings Player Mode Default setting DVD AudioDVD Audio DVD VideoSetting up the System Setup Resetting the Player Additional Information Hints on installation Power cord cautionMoving the player Don’tGlossary Mpeg video Multi-sessionOptical digital output Packed PCM DVD-Audio onlyTroubleshooting Remote control doesnt seem to work Picture disturbance during playback or darkNo audio, or audio is distorted Cannot play multi-channel audio No digital audio outputCannot output 192kHz or 176.4kHz digital audio Cannot output 96kHz or 88.2kHz digital audioSpecifications GeneralIs a registered trademark
Top Page Image Contents