Marantz DV7110 manual Connecting to a progressive scan- compatible TV, Audio, Video, Settings

525 line Digital Progressive Scan Compatible Video Output

– DVD

Connecting to a progressive scan- compatible TV

Compared to a standard interlaced TV picture, a progressive scan TV is capable of stable, flicker-free images.

Set only if you connected the COMPONENT VIDEO OUT jacks to a progressive scan-compatible TV or monitor. When making component video connections, make sure to set the VIDEO OUT SELECT switch on the rear panel of the player to the right to assign component video output (page 14).

When a progressive-scan video signal is output, the “PROGRESSIVE” indicator lights in the display.

Make changes to the [Component Video] setting in the Setup screen Video menu.

Audio1 Audio2 Video Language General

TV Screen — 16:9(Wide)

Component Video - Interlace

Progressive DNR - Progressive

Picture Quality - Auto Progressive

Select Interlace or Progressive output Component Video

Move SETUP Exit

Settings: Interlace*

Use this setting with regular TVs that are not compatible with progressive scan. Check the TV’s instruction manual if you are not sure about this.

Progressive

Use this setting with TVs and monitors that have progressive scan component video inputs. Check the TV’s instruction manual if you are not sure about this.

Auto Progressive

Switches to progressive scan when 16:9 DVD discs are played,4:3 DVD discs uses interlace setting. Your TV/monitor must be compatible with progressive scan to use this setting.

* Factory setting

Tip:

If this player is set to output progressive-scan video, it’s possible that the picture will appear stretched when playing discs recorded in 4:3 format. This happens when the TV’s aspect ratio is set at 16:9. To see the picture in its correct aspect ratio, change the TV setting to 4:3.

If your TV can be switched between 4:3 and 16:9, set this player to [Interlace] or [Auto progressive]. In Auto progressive mode, 4:3 discs will be played in Interlace mode, while discs that are recorded in both 4:3 and 16:9 will play in interlace mode during the 4:3 sections, and in progressive mode during the 16:9 parts. Switch your TV’s aspect ratio to the most suitable setting (for more details, see the manual that came with your TV). When set to [Auto progressive], you may see picture disturbance when this player (and the TV) switches between progressive and interlace modes. This is not a malfunction of either this player or the TV. Picture disturbance should only occur when switching from a menu screen to the main feature, for example.

ENGLISH

Note

If you connect a TV that is not compatible with a progressive scan signal and choose one of the progressive scan settings, you will not be able to see any picture at all. If you accidently do this, set the VIDEO OUT SELECT switch on the rear panel to COMPOSITE & S- VIDEO. With your TV connected using either the composite or S- Video terminals, choose the [Interlace] setting in the [Component Video] menu, then set the rear panel switch back to COMPONENT.

Setting the DNR (Digital Noise

Reduction) level with Digital

Progressive-scan Component Video

DNR reduces progressive scan					'video noise'. Select from 2
level of noise reduction depending on how much effect you
want. There is also an [Off] setting.
This setting only applies to progressive-scan component
video output.
Make changes to the [Progressive DNR] setting in the Setup
screen Video menu.
	Audio1	Audio2	Video	Language		General
		TV Screen — 16:9(Wide)
	Component Video —Progressive
	Progressive DNR -			High
	Picture Quality -			Low
				Off
	Progressive Compatible TV only
	Progressive DNR On/Off							ADJUSTING
This setting is for a progressive scan TV. Strong
		Move				SETUP Exit
Settings: High								AUDIO
This setting is for a progressive scan TV. Normal
DNR is applied to the picture.
Low
DNR is applied to the picture.								AND
Off*
This setting is for a progressive scan TV. No DNR								VIDEO
is applied to the picture.
							* Factory setting	SETTINGS
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Compatibility of this unit with progressive-scan TVs.
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT.

27