Marantz BD8002 manual  Audio signals output from Digital OUT

Page 15

Connections

*1 If “BD Audio Mode” is set to “Mix Audio Output” audio will be output as Multi LPCM. Refer to page 23. *2 Outputs audio signals decoded from independent substream.

*3 For DTS-HD Master Audio, outputs audio signals decoded from DTS-HD Master Audio stream, and for DTS-HD High Resolution Audio, outputs audio signals decoded from DTS core stream.

If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi LPCM or 2ch Downmix LPCM depends on the capability of the connected device even if you select “HDMI Multi(Normal)” in“HDMI Audio Out” setting. Refer to page 32.

Copyright protection system

To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both the unit and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

* HDMI: High-Definition Multimedia Interface

Note

When using HDCP-incompatible display device, the image will not be viewed properly.

Among the devices that support HDMI, some devices can control other devices via the HDMI jack, this unit cannot be controlled by another device via the HDMI jack.

The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.

Among the monitors that support HDMI, some do not support audio output (e.g, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output jack.

Digital Connection to an AV Amplifier with Built-in Decoder

ENGLISH

 

 

 

Connections

Disc type

Audio recording format

“Digital Out” setting

 

 

Bitstream

LPCM

 

Dolby Digital

Dolby Digital

2ch Downmix LPCM

 

 

 

 

 

Dolby Digital Plus

Dolby Digital

2ch Downmix LPCM

 

 

 

 

BD-video

Dolby TrueHD

Dolby Digital

2ch Downmix LPCM

 

 

 

DTS

DTS*1

2ch Downmix LPCM

 

 

DTS-HD

DTS*1

2ch Downmix LPCM

 

LPCM

2ch Downmix LPCM*1

2ch Downmix LPCM

BD-RE/BD-R

AAC

AAC

2ch Downmix LPCM

 

 

 

LPCM

2ch Downmix LPCM

2ch Downmix LPCM

 

 

Dolby Digital

Dolby Digital

2ch Downmix LPCM

DVD-video

 

 

 

DTS

DTS

2ch Downmix LPCM

 

 

 

 

 

LPCM

2ch Downmix LPCM

2ch Downmix LPCM

DivX®

Dolby Digital

Dolby Digital

2ch Downmix LPCM

 

 

 

MP3/MP2

2ch LPCM

2ch LPCM

 

audio CD/ MP3/Windows Media™ Audio

2ch LPCM

2ch LPCM

DTS-CD

 

DTS

2ch Downmix LPCM

 

 

 

 

*1 For the BD title with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions listed below are met:

When “BD Audio Mode” is set to “Mix Audio Output”.

When “HDMI Audio Out” is set to “Audio Mute”.

When “Digital Out” is set to “Bitstream”.

audio

digital audio coaxial/

 

optical cable

 

DIGITAL AUDIO INPUT

DIGITAL AUDIO INPUT

 

OPTICAL

COAXIAL

digital audio coaxial/ optical input jack

or

this unit

If the BD title does not have secondary or interactive audio, the audio will be output as shown in the table.

This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting.

Note

In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.

Note for Optical Cable

Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with

a diameter of 6 inches (15cm) or more when storing them.

• Use a cable which is 9.8 feet (3m) or shorter.

• Insert cable plugs firmly into the jacks when making connections.

Audio signals output from DIGITAL OUT

When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD. < When HDMI is not connected or “Audio Mute” is selected···>

When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the following table.

To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or “Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.

• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.

Cables not included.

Please purchase the necessary cables at your local store.

12

ENGLISH

Image 15
Contents Page Laser Safety Safety PrecautionsFCC Information For US customers ProductImportant Notice do not Modify this Product Contents FeaturesDVD-RW/-R Power Supply Installation LocationLive Parts Inside Do not Remove ANY Screws Avoid the Hazards of Electrical Shock and Fire Before UsingSupplied Accessories Dew WarningDisc Handling Cleaning DiscsPlayable Discs and Files About DiscsWMA  Change the signal code of the unit  Change the signal code of the remote controlAbout the Remote Control Rear Panel Control Connector RS-232CPart Names and Functions Front PanelRemote Control Display Description Adjusting the Brightness of the DisplayFront Panel Display Examples of Displays during OperationVideo OUT Connecting to a TVDisplay device Video OUT ComponentBD-RE/BD-R  Audio signals output from Hdmi OUTHdmi Output Mode and Actual Output Signals Audio SettingAudio  Audio signals output from Digital OUTDisc type Audio recording format Digital Out setting Digital Connection to an AV Amplifier with Built-in DecoderAC outlet Connecting the AC cordAV amplifier This unitBD-V Bdav DVD-V DVD-VR CD  Turning the power offTurning the Power On ON/STANDBY Power OFFBdav DVD-VR Operations Using Disc Menu, Title Menu, and Popup MenuPlaying Back a Bdav mode BD-RE/-R and a VR mode DVD-RW/-R BD-V DVD-VBD-V Bdav DVD-V DVD-VR DivX BD-V Bdav DVD-V DVD-VR CD MP3 WMA DivXDialog Speed BD-V Bdav DVD-V DVD-VRMP3 WMA BD-V Bdav DVD-V DVD-VR CD DivXCD MP3 WMA Jpeg Program PlaybackRandom Playback DVD-V BD-V Bdav Chapter information  Marker searchDVD-V DVD-VR MP3 Jpeg Hdmi information  Bit rate information 910 Track/File information 00000 SD T  Disc information DVD-V DivX  BD-V Bdav DVD-V DVD-VR CD DivX BD-V DVD-V DivXBD-V  Mix Audio Output HD Audio Output  Gamma correction Adjusting the PictureList of picture adjustment item/values Description Adjustment range defaultIcons MP3 WMA Jpeg DivXThis unit. Press POP UP Menu Playable times you cannot playThem back beyond the limit. If Playback confirmation screenKodak Picture CD  Setting the media modeJpeg MP3 WMA Jpeg Inserting the SD Memory Card and playback  Removing the SD Memory CardFile list will appear Quick Using the Setup MenuSetup Use U / V to select setting itemsSetting items Options  Video Language Hdmi Auto Format Hdmi RGB SettingHdmi Video Resolution Progressive ModeWall Paper BD Audio Mode Audio TV Active AreaDRC Digital Out SettingSpeaker Setting Menu Setting items Options DescriptionsSpeaker Configuration Channel Level Delay Time Ratings Proceed to a CRating Explanations Initialize  OthersTroubleshooting Problem SolutionSome functions are prohibited on some discs Language Code Language CodeRC001BD Specifications04/2008 541110080022M mzh-d E5E30UD/1VMN25597