Marantz BD8002 manual
Turning the power off, BD-V Bdav DVD-V DVD-VR CD, Turning the Power On

ENGLISH

Playback

Playback

<ON / OFF> A B C

<ON/STANDBY>

[POWER OFF]

[POWER ON] A

[U / V / Y / Z]

[ENTER]

Turning the Power On

1Press <ON / OFF>.

The power indicator lights red and the power is set to the standby mode.

2Press <ON/STANDBY> or [POWER ON].

The power indicator lights green and the power turns on.

Turning the power off

Press <ON/STANDBY> or [POWER OFF].

•The power is set to the standby mode. Press <ON / OFF> .

•The power indicator turns off, and so does the power.

Note

•Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, either press <ON / OFF> to turn off the power, or unplug the AC cord from the AC outlet.

Direct Playback

BD-V BDAV DVD-V DVD-VR CD

1Turn on the power of this unit. (Refer to “Turning the Power On” on this page.)

4Place the disc on the disc tray with its label side facing up.

	Align the disc to the
	disc tray guide.
5	Press A to close the disc tray.
	It may take a while to load

the disc.

Some discs may start playback automatically.

6Press B to start playback.

For many of BD-video and DVD-video, a menu screen may appear.

In this case, use [U / V / Y / Z] to select the desired item, then press [ENTER].

7Press C once to stop playback temporarily. Refer to “Resume Playback” on page 16.

To eject the disc:

Press A to open the disc tray, then remove the disc before turning off the unit.

C B

About the button names in this explanation

< >: Buttons on the main unit

[] : Buttons on the remote control

Button name only:

Buttons on the main unit and remote control

2Turn on the display device and select the appropriate input on the device to which the unit is connected.

3Press A to open the disc tray.

Note

• may appear at the top-right on the screen when the operation is prohibited by the disc or this unit.

•During the playback of 2-layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

•The operation may vary when you play back BD/DVD with disc menu. Refer to the manual accompanying the disc for details.

14

ENGLISH