Marantz BD8002 manual
Others, Initialize

ENGLISH

Function Setup

Others

Others		Others
Angle Icon	Off	Power Saving	On
Screen Saver	On	Remote Control Setting	BD1
Auto Power Off	On	Media Select	Disc
Panel Display	Bright
Slide Show	5sec
DivX(R) VOD
Closed Caption	Off

• For how to select the setting items and options, refer to “Custom” on page 29.

Setting items	Options
Angle Icon	On:
	The angle icon appears on the screen when playback
	the scene with various angle.
	Off*:
	The angle icon disappears on the screen.
Screen Saver	On*:
	If this unit is left with no activity for more than 5
	minutes, the screen saver will be activated.
	Off:
	Sets off the screen saver.
Auto Power Off	On*:
	If this unit is left with no activity for more than 30
	minutes, this unit turns off automatically.
	Off:
	Sets off the auto power off.
Panel Display	Bright*:
Sets the brightness of the front	Front panel display gets brighter.
panel display.
	Dimmer:
	Front panel display gets darker.
	Auto:
	Front panel gets darker during playback.
Slide Show	5sec*
Sets the display time for the still
	10sec
picture (in JPEG format) playback
DivX(R) VOD	For more information about DivX® VOD visit
Provides DivX® VOD registration	www.divx.com/vod
code.

Function Setup

Setting items	Options
Closed Caption	On
Sets whether display the closed
caption or not using the caption	Off*
decoder (commercially available ).
Power Saving	On*:
Lower the power consumption for	Denies the command from RS-232C when the power is
standby mode by denying the	in standby mode.
command from RS-232C during
	Off:
standby mode.
	Accepts the command from RS-232C when the power is
	in standby mode.
Remote Control Setting	BD1*
Changes the signal code of a
	BD2
remote control. (Refer to page 6)
Media Select	Disc*:
Select the media to playback.	Select this when you play back a disc.
	SD Memory:
	Select this when you play back a SD Memory Card.

Initialize

Initialize the setting or SD Memory Card.

Initialize

Initialize?

No

Setup

Memory Device

1)Press [SETUP] in stop mode.

2)Use [Y / Z] to select “Initialize”, then press [ENTER].

3)Use [U / V] to select a desired option, then press [ENTER].

“No”	:Exit without any initialization.
“Setup”	:Reset the SETUP setting to the factory default.

“Memory Device” :Initializes the SD Memory Card. After confirmation message appears, use [U / V] to select “Yes”, then press [ENTER].

4)Press [ENTER]. (For “Setup” and “Memory Device” only)

5)Press [SETUP] to exit.

Note

• The setting for “Ratings” will not be reset.

37

ENGLISH