Marantz Complete Function Setup Manual for Your BD8002

Function Setup

Setting items	Options
TV Active Area	Normal:
Sets the horizontal display area for	Select this if the image is not stable with connecting to
interlace (480i) output.	professional-use display.
	Full*:
	Select this for connecting to commonly-marketed
	display.
Wall Paper	Picture*
Sets the picture to be displayed on
	Blue
the screen for stop mode or audio
	Black
playback mode.
	Gray

•Settings with (*) are the default.

•Quick menu consists of the setting menus frequently used, and they are accompanied with mark.

•For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is effective only for HDMI RGB output.

•Even if “HDMI Video Resolution” is set to “1080p24” and “I/P Direct” is set to “On”, for the BD that is not recorded by 1080p24 frame or for DVD, a video resolution supported by the disc and the display device will be output instead of 1080p24 frame.

•An individual picture on the screen is called as “Frame” , which consists of two separate images called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their data characteristics.

•If the picture is not output properly to the display device because of the “HDMI Video Resolution” or “Component Output” setting, press and hold B on the front panel for more than 5 seconds. Both settings will be reset to the default automatically.

•If “Component Output” is set to “480i”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV Aspect” are not available.

•If HDMI is connected, for video resolution for the component output, you can only select video resolution that currently output from HDMI OUT or 480i.

•If the video resolution for the component output and HDMI video resolution does not match, the video resolution for the component output will be switched to current HDMI output resolution. COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.

•If you play back copy-protected DVD video, 480p signal will be output from the COMPONENT VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.

•If connected display device does not support 1080p24 frame or “I/P Direct” is set to “Off”, “1080p24” in “HDMI Video Resolution” will be displayed in gray and you can not select the item.

•For playing back BD, if you set “Component Output” to “480i”, 480p signal will be output from the COMPONENT VIDEO OUT jacks.

•The setting items which are not available with current situation of this unit will be displayed in gray and you cannot select the items.

•Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be output.

•If “HDMI Video Resolution” is set to “1080p” or “1080p24”, you cannot set “Component Output”.

ENGLISH

Function Setup

Audio

Audio		Audio
BD Audio Mode	Mix Audio Output	Audio Adjust	0ms
HDMI Audio Out	HDMI Multi (Normal)	Virtual Surround	Off
7.1ch Audio Out	Multi Channel
Down Sampling	Off
DRC	Auto
Source Direct	Off
Bass Enhancer	Off

• For how to select the setting items and options, refer to “Custom” on page 29.

Setting items	Options
BD Audio Mode	Mix Audio Output*:
For BD, select whether to output	Output the secondary and interactive audio with
	primary audio if it is available.
the secondary and interactive
audio with primary audio if it is
available or only the primary	HD Audio Output:
audio. Refer to “Setting the BD	Output only the primary audio. Set this mode in order to
Audio Mode” on page 23.	output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
	DTS or DTS-HD sound of BD through HDMI connection.
HDMI Audio Out	HDMI Multi(Normal)*:
Sets the audio format for the audio	The multi-channel audio signals are output from the
	HDMI OUT with a bitstream or LPCM.
output from the HDMI OUT.
	HDMI Multi(LPCM):
	The multi-channel audio signals are output from the
	HDMI OUT with a LPCM.
	• Refer to pages 34-35 for setting options.
	HDMI 2ch:
	The audio signals are output from the HDMI OUT with a
	downmixed to 2ch LPCM.
	Audio Mute:
	Mutes the HDMI audio signal, and set the signal format
	of the DIGITAL OUT.
	• Refer to the “Digital Out Setting” on page 33 for setting
	options.

•The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.

32

ENGLISH