Connecting Up, Easy setup | Marantz 541110153029M, Dv4003 manual

•

ENGLISH

Connecting Up

Before You Start Connecting

Easy setup

This easy setup is the minimum set of connections you need to start watching DVD-Video discs. Both sound and picture are fed directly to your TV using the supplied audio/video cables. For other possible connections, see pages 11 and 12.

Important

•Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

•While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

Up Control & Displays Getting Started

1 Connect to a composite video	INT. EXT.	See Note:
input on your TV using the		Remote Switch
supplied Audio/Video cable.		(for USA only)

	AUDIO CR/PR	VIDEO	REMOTE
	Y	VIDEO	CONTROL
	L	IN	CONTROL
	L
			INT. EXT.
	R	OUT
	R	S1
HDMI	DIGITAL CB/PB	A/V EUROCONNECTOR	AC IN
HDMI	ANALOG COAX. COMPONENT	A/V EUROCONNECTOR	AC IN

2 Connect to a pair of stereo audio	3 Plug into a standard
inputs on your TV using the	AC wall outlet.
supplied Audio/Video cable.

Playing Discs DVD Setup Menu Additional Information

Connecting audio/video cables

Be sure to insert each plug fully for the best connection. The plugs and jacks are color-coded to make connection easier.

Connecting system control cables (USA only)

By connecting this DVD player to another Marantz audio component using a supplied system control cable, you can remotely operate the components as a single system.

•When connecting to a component with a remote sensor, be sure to connect the REMOTE CONTROL IN jack of this DVD player to

the REMOTE CONTROL OUT jack of the component with the remote sensor.

•When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the REMOTE CONTROL OUT jack of this DVD player.

Note

•When connecting to a standard TV, select

4:3 LETTER - BOX or 4:3 PAN SCAN in the TV Aspect setting (see page 40).

•Connect the video output of the player directly to your TV. Because the player is designed to support an Analog Protection System copy card, there are cases when proper playback will be not be possible if the player is connected to the TV through a VCR and images are recorded and played on the VCR.

•The player’s video output and S1 output are not be progressive.

•Remote switch (USA only)

When using this DVD player independently, set this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to EXT. (EXTERNAL).