Marantz 541110153029M, Dv4003 manual Home theater audio connections, Connecting analog audio cables

•

ENGLISH

2

Before You

Start

Connecting Up

Home theater audio connections

This player outputs multi-channel audio in digital form. Check the manual for your amplifier/receiver to see what equipment it is compatible with (especially which digital formats such as Dolby Digital, DTS, etc. It can decode).

Important

•Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

•While a connected component is turned on, do not unplug the power cord of this DVD player from the wall outlet. The speaker may be damaged.

Connecting Up Control & Displays

1 If your amplifier has stereo inputs only, connect them here.

	AUDIO CR/PR	VIDEO	REMOTE
	Y		CONTROL
	L	IN
			INT. EXT.
	R	OUT
		S1
HDMI	DIGITAL CB/PB	A/V EUROCONNECTOR	AC IN
	ANALOG COAX. COMPONENT

Getting Started

Playing Discs

DVD Setup

Menu

InformationAdditional

2 Connect to the coaxial input of your amplifier, if it has digital inputs.

Connecting analog audio cables

Be sure to fully insert each plug for the best connection. The plugs and jacks are color-coded to make connection easier.

Connecting coaxial cables

Use an interconnector with a pin-type (also called RCA

or phono) plug on each end to connect

up digital coaxial- type jacks. Make

sure that the plug is pushed fully home.

3	Plug into a standard
	AC wall outlet.

12