Marantz Dv4003 manual Setting up the Audio Setup, Audio OUT, Digital OUT, Default setting ALL

•

ENGLISH

DVD Setup Menu

Setting up the AUDIO SETUP page

1Press the SETUP button.

2Select AUDIO SETUP PAGE using the cursor buttons (2/3), then press the ENTER button.

3Use the cursor buttons (5/∞) to select the desired item, then press the cursor (3) or

ENTER button.

AUDIO SETUP PAGE

AUDIO OUT

DIGITAL AUDIO

HDMI AUDIO OUT

AUDIO DRC

LIP SYNC

Note

•Press 2 to go back to the previous menu item. Press SETUP to exit the menu.

AUDIO OUT

•Default setting: STEREO

•STEREO – This option will downmix Dolby Digital signals directly into analogue stereo from L/R jacks.

•LT/RT – This option should be used only if your DVD player is connected to a Dolby Pro Logic decoder.

Note

• DTS is not supported.

DIGITAL OUT

•Default setting: ALL

Set the Digital output according to your optional audio equipment connection.

•OFF – Turn off the digital output.

•ALL – If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/ receiver.

•PCM – Only if your receiver is not capable of decoding multi-channel audio.

Note

•If HDMI is activated, DIGITAL OUT is muted. HDMI audio out is related to the “DIGITAL OUT” setting. If set the “ALL” is set, HDMI Audio out is follows the EDID. If set the “PCM” is set, HDMI Audio out is always PCM.

•If set the “PCM” is set, DTS is muted.

•If you set to “ALL” with a non-DTS compatible amplifier, noise will be output when you play a DTS disc.

6

StartYou

Before

UpConnecting

Playing Discs Getting Started Control & Displays

MenuSetup

DVD

AdditionalInformation

37