Getting Started
OPEN/ | POWER |
CLOSE |
STOPPLAYPAUSE
NEXT REW
PREV.FF
Playing discs
The basic playback controls for playing discs are covered here. Further functions are detailed in the next chapter.
Note
Throughout this manual, the term ‘DVD’ means DVD- Video,
1Switch the player on.
If you’re playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input.
2 Press OPEN/CLOSE to open the disc tray.
3Load a disc.
Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double- sided DVD disc, load it with the side you want to play face down).
4Playing a DVD automatically.
If you’re playing a DVD or Video CD, a menu may appear (see page 17).
Note
For
Basic playback controls
Button | What it does |
3Starts playback.
DVD and Video CD: if the display shows RESUME, playback starts from the resume point.
8Pauses a disc that’s playing.
7Stops playback.
DVD and Video CD: Display shows RESUME. Press 7 (STOP) again to cancel the resume function.
11. Press for fast reverse scanning during play.
2. Press again to increase the scan speed. (Super Audio CD and CD have 4 scan speeds; DVD and Video CD have 7.) Press 3 (PLAY) to resume normal playback.
¡1. Press for fast forward scanning during play.
2. Press again to increase the scan speed. (Super Audio CD and CD have 4 scan speeds; DVD and Video CD have 7.) Press 3 (PLAY) to resume normal playback.
4Skips to the start of the current track or chapter, then to previous tracks/chapters.
¢Skips to the next track or chapter.
Important
While using the DVD playback controls, you may see the mark displayed
16