Marantz DV9500 Back Ground, Screen Saver, TV System, MOD. Modulation PAL Shrink, Stop button

DVD Setup Menu

Back Ground

• Default setting: Logo

This specifies what the screen shows when the player is stopped.

Note

If Capture is selected, a picture taken in by Capture is displayed. (page 29)

Screen Saver

• Default setting: On

If a constant image is displayed on a conventional CRT-type TV, it can “burn in” leaving a ghost image on the screen. Switch to On to make sure that a constant image is not displayed for a dangerously long time.

TV System

• Default setting: Multi

The default setting of this player is Multi, and unless you notice that the picture is distorted when playing some discs, you should leave it set to Multi.

If you experience picture distortion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (Multi, PAL and NTSC).

Disc			Output format
Type	Format	Position of TV SYSTEM
		NTSC	PAL	Multi
DVD	NTSC	NTSC	MOD. PAL	NTSC
	PAL	NTSC	PAL	PAL
Video CD/	NTSC	NTSC	MOD. PAL	NTSC
Super VCD
	PAL	NTSC	PAL	PAL
Super Audio		NTSC	PAL	NTSC
CD
CD, No disc		NTSC	PAL	NTSC

MOD. (Modulation) PAL

•Shrink

Most models of the newly developed count- down PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

•If your PAL TV does not have a V-Hold control, you may not be able to view NTSC discs, because the picture may roll. If the TV has a V- Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC to PAL conversion.

Note

•When the selected format is changed to a different format from the TV format in which a program was recorded, the picture may become jerky and the upper and lower parts of the screen may disappear. The above setting should be specified to match the format of your own TV.

•Changes can be made only in the Stop mode. When RESUME is indicated on the display, put the player in the Stop mode by repressing

7 (STOP) button.

48