DVD Setup Menu
Setting up the Audio Setup 2
1 Press the SET UP button.
2Select Setup using the cursor buttons (5/ ∞), then press the cursor (3) or ENTER button.
3Select Audio Setup 2 using the cursor buttons (5/∞), then press the cursor (3) or ENTER button.
4Use the cursor buttons (5/∞) to select the desired item, then press the cursor (3) or
ENTER button.
Note
To make the SETUP menu disappear or return to the menu screen during setup, press the RETURN or cursor button (2).
Super Audio CD Mode
• Default setting: Stereo
Super Audio CD discs can be divided up into several different areas – stereo audio, Multi channel audio and, for hybrid Super Audio CDs, standard CD audio. The Super Audio CD Play setting enables you to select which area of the disc you want to play with the cursor buttons (2/3).
Note
•If you select an area that isn’t on the disc loaded, a different area of the disc will play. For example, if you choose standard CD audio but the disc loaded is not a hybrid Super Audio CD, the stereo Super Audio CD audio will play.
•You can also select it using the S.MODE button on the remote control.
Player Mode
• Default setting: DVD Audio
Replay DVD Audio as DVD Video? (DVD replay method)
Use the cursor buttons (2/3) to select
either DVD Audio or DVD Video.
•DVD Audio
Should be selected when the player is to be used as a DVD audio player.
•DVD Video
Should be selected when the player is to be used as a DVD video player.
Note
Even when DVD Video has been selected, the selected setting will return to DVD Audio (i.e., to the default setting) when the disc table is opened or when the power is turned off.
42