Marantz DV9500 Select Resolution, Select Format, VGA 640 X 480p/576p 525p/625p 720p 750p 1080i

DVD Setup Menu

HDMI

This setting is used when the unit is con- nected by HDMI or DVI with a TV or projec- tor.

This setting is enabled only when the HDMI option of the FL menu is On. (page 32)

Press ENTER

1Select Resolution

•VGA <640 X 480>

•480p/576p (525p/625p)

•720p (750p)

•1080i (1125i)

Select one of the above with the cursor buttons (5/∞) and then press the ENTER button.

Note

•The resolutions available for HDMI outputs depend on the connected TV or projector. For details, see the user’s manual of your TV or projector.

•If, after changing the resolution, images are not displayed properly on the TV or projector, press and hold the MENU button for two seconds to bring up the FL menu. Then set HDMI RESET to reset. (page 32)

•VGA can be outputed only when TV System is set to NTSC.

•When the resolution changes, the image may be corrupted or the output may take longer than normal.

2 Select Format

•RGB-Normal

•RGB-Expand

•YCbCr-1 (4:4:4)

•YCbCr-2 (4:2:2)

Select one of the above with the cursor buttons (5/∞) and then press the ENTER button.

Note

•Image data values in RGB-Normal format range between 16 (black) and 235 (white).

•Image data values in RGB-Expand format range between 0 (black) and 246 (white).

•The formats available for HDMI outputs depend on the connected TV or projector. For details, see the user’s manual of your TV or projector.

•Only RGB-Normal and RGB-Expand can be selected for DVI outputs.

•When black rise to the surface depending on the display, black Setup in the Video Adjust- ment set to OIRE.

52