Memorex MT2025D Outdoor VHF/UHF Antenna Connection Antenna not Included, Receiving Atsc Channels

Connect the 75 ohm cable from the VHF antenna and the UHF antenna twin-lead wire to a combiner (NOT SUPPLIED). Attach the combiner to the antenna jack. NOTE: If your VHF antenna has a twin- lead wire, use a 300-75 ohm matching transformer, then connect the transformer to the combiner.

OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the previous page.
Combination VHF/UHF	Combination VHF/UHF	Separate VHF/UHF Antennas
Antenna (Single 75 ohm cable	Antenna (Separate VHF and
or 300 ohm twin-lead wire)	UHF 300 ohm twin-leads)

Connect the 75 ohm cable from combination VHF/UHF antenna to the antenna jack. OR

If your combination antenna has a 300 ohm twin-lead wire, use a 300-75 ohm matching transformer (NOT SUPPLIED).

Connect the UHF twin-lead wire to a combiner (NOT SUPPLIED). Connect the VHF twin-lead to a 300-75 ohm matching transformer (NOT SUPPLIED). Attach the transformer to the combiner. Attach the combiner to the antenna jack.

RECEIVING ATSC CHANNELS

You can connect to an outdoor antenna to receive the free ATSC digital channels.

The size of the antenna you will need will depend on how far away the television station broadcast antennas are from you. The further the distance the larger the antenna you need. If your unsure of how far you are you can go to http://www.antennaweb.org and put in your zip code to search their database for your distance and the direction of the broadcast antennas. If you’re fairly close you may be able to get away with just a small antenna that will sit on top of your TV set. If you need a larger antenna you can either put one in the attic or outside on an antenna mast.

The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as a camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio 2 Input jacks and the Video 2 Input jack.

To access the unit connected to
these jacks, press the INPUT
button repeatedly until AV2		EXTERNAL SOURCE
appears on the screen. To	(i.e. camcorder, video game)
resume normal TV viewing,
simply press the INPUT button
repeatedly until the TV channel			AUDIO/VIDEO Cord
appears in the display.			(Not Supplied)

FAQs:

My external unit has only 1 audio jack, but this unit has two Audio Input jacks, how do I connect it? Simply connect it to the “L (Mono)” Audio Input jack, but the sound will be monaural.

How do I watch the external unit connected to the Audio/Video Input jacks?

Press the INPUT button repeatedly until AV2 appears on the screen, then start the external source. Are the cables included?

No, the cables are sold separately, visit your local electronics store.

9