Kenmore 790.99613 manual Consumer Defined Control, Instructions Press Display

Setting Oven Controls

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The _ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

	INSTRUCTIONS	PRESS	DISPLAY
To activate the Oven Lockout feature
1.	Press and hold Lsro_)for 3 seconds.	O for 3
	v	seconds
2.	After 3 seconds "Loc" will appear, a beep will sound and		Figure 1
	"DOOR LOCKED" will flash in the display. Once the oven door

is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure 1).

To reactivate normal oven operation

1.Press and hold _-TO_for3 seconds. A beep will sound. The

v

"DOOR LOCKED" will flash in the display until the oven door has completely unlocked (Figure 2).

2.The wall oven is again fully operational.

Ofor3

seconds

Figure 2

Setting Silent	Control Operation
The DELAYTIME	_	and FLEX CLEAN _	pads control the Silent Control operation feature.The Silent Control
		v

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS PRESS DISPLAY

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press

	and hold _.	"--:-"	will appear and	"DELAY"	will flash in the
	display (Figure 3). After 7 seconds "SP" (Speaker) will appear
	in the display (Figure 4).
2.	Press _	to switch	between normal	sound operation and
	silent operation mode. The display will show either "SP"
	(Figure 4) or ":--" (Figure 5).
	If "SP" appears (Figure 4), the control will operate with normal
	sounds and beeps. If ":- -" appears (Figure 5), the control is in
	the silent operation mode.
3.	Press (_	to accept the change or		press s_	to reject the
	change.

Note: The control will always beep at the end of a kitchen timer and reached, even if the control is set to silent operation.

Figure 3

@

for 7 seconds

Figure 4

Figure 5

C)

will beep when a set temperature has been

17