5Switching Each Mode, 5Switching Audio Mode, Main

WATCHING TV

5Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit.

5Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

Press [INPUT] repeatedly to cycle through the input mode.

ANALOG MODE

DIGITAL MODE

VIDEO1

VIDEO2

•To use the video or S-video input jack on the unit, select “VIDEO1”.

•To use the component video input jack on the unit, select “VIDEO2”.

While receiving an MTS broadcast, press [AUDIO ] repeatedly to cycle through the available audio channel.

		MAIN
		SAP
		MONO
MAIN		: Outputs main-audio
SAP		: Outputs second audio program
MONO		: Outputs mono-audio

•The information display will automatically disappear in a few seconds.

DTV

Note:

•When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode.

NOW SCANNING

1Press [AUDIO ] to display the currently selected language and the number of available languages.

KABC	CH 95-03
A Day of Memories
ENGLISH	1/3

2Press [AUDIO ] repeatedly to cycle through the available audio languages.

•Available languages differ depending on the broadcast. “OTHER” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

•The information display will automatically disappear in a few seconds.

Note:

• Pressing [AUDIO ] does not control external audio device.

WATCHING TV