FUNAI LC200EM8G Maintenance, With an AM radio, Control’s infrared signal, Phone cameras

Page 26

TROUBLESHOOTING

Symptom

Remedy

The entered channel number

• Many digital channels have alternate channel numbers. The unit changes the

changes automatically

numbers automatically to the ones signifying the broadcasting stations. These are

 

the numbers used for analog broadcasts.

Remote control does not work

• Check the antenna or cable connection to the main unit.

 

• Check the batteries of the remote control.

 

• Check if there is an obstacle between the infrared sensor window and the remote control.

 

• Test the signal output. If OK, then possible infrared sensor trouble.

 

(Refer to “IR Signal Check” on page 26.)

 

• Aim the remote control directly at the infrared sensor window on the front of the unit.

 

• Reduce the distance to the unit.

 

Re-insert the batteries with their polarities (+/– signs) as indicated.

 

Problems with Closed Caption Feature

 

 

Misspelled captions are

• Closed captioning production companies may broadcast programs without

displayed.

correcting the misspelling in a live broadcast.

Captions are not entirely

• Captions that are delayed a few seconds behind the actual dialogue are common for

displayed, or captions are

live broadcasts. Most captioning production companies can display a dialogue to a

delayed behind the dialogue.

maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is

 

used to insure that the captions remain up-to-date with the current TV screen dialogue.

Captions are displayed as a

• Interference from buildings or weather conditions may cause captioning to be

white box.

incomplete.

No caption is displayed in the

• Broadcasting station may shorten the program to insert advertisement. The closed

closed caption-supported

caption decoder cannot read the information of the shortened program.

program.

 

No caption is displayed

• The videotape may be illegally copied, or the caption signal might not have been

when playing the videotape

read during copying.

containing captions.

 

Black box is displayed in the

• The text mode is selected for caption. Select “CAPTION1”, “CAPTION2” or “OFF”.

TV screen.

 

Note:

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more details on correct operations.

5Maintenance

Cabinet Cleaning

Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord.

IR Signal Check

If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

• With an AM radio:

Tune the AM radio station to a non-broadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote

control’s infrared signal.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

• With a digital camera (including built-in cell

phone cameras):

Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.

26

EN

Image 26
Contents To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna LC200EM8GIntroduction Important note is located on the rear of the cabinetPrecautions RADIO-TV Interference5Tilt Stand 5Supplied Accessories5Symbols Used in this Manual LocationFeatures Contents5Remote Control Function 5Installing the Batteries5Control Panel 5Rear PanelAntenna Cable Connection Connection5Basic Connection Connection to Cable Box or Satellite BoxVideo Cable Connection 5External Device ConnectionComponent Video Cable Connection RCA video cable Video Connection5Main Menu Initial Setting5Initial Setup 5Auto Channel Scan 5Language Selection5Channel Selection What is the minor channel?Watching TV Use CH. K/L or the Number buttonsMain 5Switching Each Mode5Switching Audio Mode SAPBroadcasting Information 5Screen InformationPress Display Program GuideTo Cancel the Sleep Timer 5TV Screen Display Mode5Sleep Timer LetterboxOptional Setting 5Channel Add/DeleteBrightness Contrast 5Picture Adjustment5Closed Caption Tint SharpnessTo select DTVCC, then press To select Caption SERVICE, thenPress Enter repeatedly to change the setting Enter5DTVCC Style You can set the desired brightness mode 5Back Light Setting5Color Temperature You can adjust color temperature of the TV screen5V-chip Certain programming inappropriate for childrenAssociation of America Change the settingTo Set the Sub Ratings To select Mpaa RATING, then pressChange Password Enter password again in Confirm Password spaceTroubleshooting 5Troubleshooting GuideWith an AM radio MaintenanceControl’s infrared signal Phone camerasInformation Limited Warranty