FUNAI LC200EM8G 5Picture Adjustment, 5Closed Caption, Brightness Contrast, Tint Sharpness

Page 18

OPTIONAL SETTING

5Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “PICTURE”, then press [ENTER].

e.g.) digital TV mode

 

- TV SETUP

-

or

PICTURE

 

CHANNEL SETUP

 

V-CHIP SETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

 

COLOR TEMP.

[NORMAL]

 

DTVCC

 

 

 

 

5Closed Caption

TV

You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CAPTION”, then press [ENTER] repeatedly to change the setting.

e.g.) digital TV mode

 

- TV SETUP

-

 

PICTURE

 

 

CHANNEL SETUP

 

V-CHIP SETUP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT

[BRIGHT]

or

COLOR TEMP.

[NORMAL]

DTVCC

 

 

 

 

3Use [Cursor K/L] to select the picture quality type you want to adjust.

BRIGHTNESS

CONTRAST

orCOLOR

TINT

SHARPNESS

4Use [Cursor s / B] to adjust the quality.

or

 

Cursor s

Cursor B

BRIGHTNESS

to decrease brightness

to increase brightness

CONTRAST

to decrease contrast

to increase contrast

COLOR

to decrease color

to brighten color

TINT

to add purple

to add green

SHARPNESS

to make soft

to make clear

5Press [SETUP] to exit.

OFF

CAPTION1

CAPTION2

TEXT1

TEXT2

[Caption Mode]

CAPTION1 and TEXT1;

are the primary caption and text services.

The captioning or text is displayed in the same language as the program’s dialogue

(up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

CAPTION2 and TEXT2;

are rarely available and broadcasters use them

only in special conditions, such as when “CAPTION1” or “TEXT1” is not available.

• There are 3 display modes according to programs:

Paint-on mode: Displays input characters on the TV screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines).

Note:

The picture adjustment setting display will automatically disappear in a few seconds.

18

EN

Image 18
Contents To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna LC200EM8GIntroduction Important note is located on the rear of the cabinetPrecautions RADIO-TV Interference5Tilt Stand 5Supplied Accessories5Symbols Used in this Manual LocationFeatures Contents5Remote Control Function 5Installing the Batteries5Control Panel 5Rear PanelAntenna Cable Connection Connection5Basic Connection Connection to Cable Box or Satellite Box5External Device Connection Component Video Cable ConnectionVideo Cable Connection RCA video cable Video ConnectionInitial Setting 5Initial Setup5Main Menu 5Auto Channel Scan 5Language Selection5Channel Selection What is the minor channel?Watching TV Use CH. K/L or the Number buttonsMain 5Switching Each Mode5Switching Audio Mode SAPBroadcasting Information 5Screen InformationPress Display Program GuideTo Cancel the Sleep Timer 5TV Screen Display Mode5Sleep Timer LetterboxOptional Setting 5Channel Add/DeleteBrightness Contrast 5Picture Adjustment5Closed Caption Tint SharpnessTo select DTVCC, then press To select Caption SERVICE, thenPress Enter repeatedly to change the setting Enter5DTVCC Style You can set the desired brightness mode 5Back Light Setting5Color Temperature You can adjust color temperature of the TV screen5V-chip Certain programming inappropriate for childrenAssociation of America Change the settingTo Set the Sub Ratings To select Mpaa RATING, then pressChange Password Enter password again in Confirm Password spaceTroubleshooting 5Troubleshooting GuideWith an AM radio MaintenanceControl’s infrared signal Phone camerasInformation Limited Warranty