Sony KV27FV16 service manual Diagnostic Item Flash Count, Standby/Timer Led

Display of Standby/Timer LED Flash Count

2 times

4 times

5 times

LED ON 0.3 sec.
	LED OFF
LED OFF 0.3 sec.
		3 sec.

Diagnostic Item	Flash Count*
+B overcurrent	2 times
I-Prot	4 times
IK	5 times

*One flash count is not used for self-diagnostic.

KV-27FV16/29FV16/29FV16C/32FS12/32FS16

STANDBY/TIMER LED

Stopping the Standby/Timer LED Flash

Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LAMP from flashing.

Self-Diagnostic Screen Display

For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure on the screen for confirmation.

To Bring Up Screen Test

In standby mode, press buttons on the Remote Commander sequentially, in rapid succession, as shown below:

Display

Channel 5

Sound volume

Power ON

Note that this differs from entering the service mode (sound volume + ).

Self-Diagnostic Screen Display

SELF DIAGNOSTIC

2:		0
3:	N/A	0
4:		0
5:		1
101:	N/A	0

Numeral “0” means that no fault was detected.

Numeral “1” means a fault was detected one time only.

— 5 —