Sony KV27FV16 service manual Connecting Additional Equipment

— 9 —

Connecting Your TV

Connecting Additional Equipment

TV and VCR

Rear of TV

2

VCR

1

From cable/ antenna

3(Optional connection)

1Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.

2Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.

￿To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR).

(Optional connection)

3If your VCR is equipped with video outputs, you can get better picture quality by connecting A/V cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.

For optimum picture quality, use S VIDEO instead of the yellow A/V cable.

￿S VIDEO does not provide sound, the audio cables must still be connected.

You can use the button to switch between the VHF/UHF and VIDEO inputs.

5

Operating Instructions

TV and Cable Box

Cable Box

1

Rear of TV

From

cable

2

1Connect the coaxial cable from your cable service to the IN jack on your cable box.

2Connect a coaxial cable (not supplied) from the OUT jack on your ￿cable box to the VHF/UHF jack on the TV.

To view channels from your cable box, tune your TV to channel 3 or 4 (as set on the rear panel of your cable box) and use the cable box’s remote control to

￿change channels.

If you will be controlling all channel selection through your cable box, you should consider using the Channel Fix feature, (see page 26).

6

KV-27FV16/29FV16/29FV16C/32FS12/32FS16