SECTION 1 GENERAL
KV-
The instructions mentioned here are partial abstracts from the Operating Instruction Manual.
The page numbers shown reflect those of the Operating Instruction Manual.
Connecting Your TV
Operating Instructions
Cable Box Connections
Some pay cable TV systems to use scrambled or encoded signals that require a cable box to view all channels.
27FV16/29FV16/29FV16C/32FS12/32FS16
Read this chapter before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting.
Basic Connections
TV with indoor or outdoor antenna, or CATV cable
Cable Box
Cable
IN
Cable Box
(Rear of TV)
VHF/UHF
OUT
— 8 —
Depending on the cable available in your home, choose one of the connections below:
If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for best reception.
3
1Connect the coaxial cable from your cable service to the IN jack on your cable box.
2Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on your TV.
If you will be controlling all channel selection through your cable box, you should consider using the Channel Fix feature, (see page 26).
Cable Box and Cable
For this set up, you can switch between scramble channels (through your
cable box), and normal (CATV) channels by using the 
button.
Cable Box | (Rear of TV) | |
AUX | ||
IN | ||
| ||
OUT | TO CONVERTER | |
| ||
| VHF/UHF | |
CATV cable (unscrambled channels)
If you are connecting a cable box through the AUX input and would like to switch between the AUX and normal (CATV) input, you should consider using the Channel Fix feature, (see page 26).
Your Sony remote control can be programmed to operate your cable box,
(see page 36).
When using PIP, you cannot view the AUX input in the window picture.
4