V. SIZE ADJUSTMENT ( VSIZ)
1.Input a
2.Set to Service adjustment mode.
3.Select VSIZ with 
and 
.
4.Adjust with 
and 
for the best vertical size.
5.Write into the memory by pressing 
then 
**.
PIN AMP (PAMP)
PIN PHASE (PPHA)
V. SIZE
/
/
V ANGLE (VANG), V BOW (VBOW), UPPER PIN (UPIN)
AND LOW PIN (LPIN) ADJUSTMENTS
V. POSITION ADJUSTMENT (VPOS)
1.Input a
2.Set to Service adjustment Mode.
3.Select VPOS with | and . |
|
|
|
|
4.Adjust with and | for the best vertical center. |
|
| ||
5.Write into the memory by pressing |
| then |
| **. | |
|
| ||||
1.Input a cross hatch signal.
2.Set to Service adjustment Mode.
3.Select VVANG, VBOW, UPIN, and LPIN with 
and
4.Adjust with 
and 
for the best picture.
5.Write the memory by Pressing 
then 
V ANGLE (VANG)
.
** .
V.POSITION
H. POSITION ADJUSTMENT (HPOS)
1.Input a
2.Set the Service adjustment Mode.
3.Select HPOS with 
and 
.
4.Adjust with 
and 
for the best horizontal center.
5.Write into the memory by pressing 
then 
**.
V BOW (VBOW)
UPPER PIN (UPIN)
H. POSITION
V LINEARITY (VLIN), V CORRECTION (VSCO), PIN AMP (PAMP) AND PIN PHASE (PPHA) ADJUSTMENTS
1.Input a
2.Set to Service adjustment Mode.
3.Select VLIN, VSCO, PAMP, and PPHA with 
and 
.
4.Adjust with 
and 
for the best picture.
5.Write the memory by Pressing 
then 
** .
V LINEARITY(VLIN)
VS CORRECTION (VSCO)
LOW PIN (LPIN)
P BOARD ADJUSTMENTS
PIP V. POSITION (PIPV), PIP H. POSITION (PIPH)
1.Input a color bar signal.
2.Set to service adjustment mode.
3.Select PHOP with 
and 
.
4.Adjust with 
and 
for the best balanced position at four corner P in P display position.
5.Adjust P in P put at lower right position.
6.Write the memory by Pressing 
then 
**.
**WARNING: Do NOT turn off the power or AC immediately after pressing 
then 
. Wait at least 10 seconds.
— 21 —