Sony KV-27V40 service manual Watching the TV, Using the White Labeled Buttons for TV Operations

KV-27S40 / 27S45 / 27S65 / 29SL40 / 29SL40A / 29SL40C/ 29SL45 / 29SL65 / 29SL65C/ 29XL40M / 29XL40P / 29XT11A

Using your New TV (continued)

Watching the TV

All of the TV features can be accessed via the remote control. The following chart will explain the function of the buttons found on your remote control.

REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART

Using the White Labeled Buttons for TV Operations.

	FUNCTION			Activate the remote control for use with the following components: TV, DBS/CABLE,
VTR/DVD DBS/CABLE			TV	VTR/DVD. Press when you want to control connected components with your remote
				control. (see pages 26-28 for instructions on programming your remote control)
	POWER			Turns the TV on and off. If VIDEO appears on the screen, press TV/VIDEO or
		TV		ANT until a channel number appears.
0 - 9				Use for direct channel selection. Press 0-9 to select a channel, the channel will
				change after 2 seconds, or you can press ENTER for immediate selection.
		CH		Press to scan through the channels.
				Keeping the CH + or – pressed allows you to rapidly scan to the desired channel.
	JUMP			Press to alternate or jump back and forth between two channels. You can jump
				between the last two channels selected with the 0-9 keys.
	MUTING			Press to mute the sound (MUTING will appear on the screen). Press again or
				press VOL + to restore sound.

14

Using the White Labeled Buttons for TV Operations.

FREEZE	Press to freeze the window picture while in PIP mode. If you are not in PIP mode,
	pressing FREEZE will cause the main picture to freeze into a window picture.
	Great for copying down phone numbers, addresses, recipes, etc.
SLEEP	Press repeatedly until the TV displays the approximate time in minutes (30, 60, or
	90) that you want the TV to remain on before shutting off automatically.
	Cancel by pressing until SLEEP OFF appears.
DISPLAY	Press repeatedly to step through available displays:
	Status
	Channel number, current time, channel caption (if set) and Multi-Channel TV
	Sound (MTS) are displayed.
	The MTS mode indication disappears after three seconds.
	CAPTION VISION
	CAPTION VISION will be displayed on the screen if the broadcaster offers this
	service. (see right)
	To cancel the display, press DISPLAY repeatedly until DISPLAY OFF appears.
	DISPLAY OFF disappears after three seconds.
TV/VIDEO	Press repeatedly to step through available video inputs:
	TV and VIDEO 1 (KV-27S40 only)
	TV, VIDEO 1 and VIDEO 2 (KV-20V80, 27S45, 27S65, 27V40 only)
	TV, VIDEO 1, VIDEO 2 and VIDEO 3 (KV-27V45, 27V65 only)
ANT	Press to change the VHF/UHF input to the AUX input (KV-27S65, 27V65 only).
(AUX input)	For detailed connection information, see “Cable and antenna” or "Cable box and
	cable” on pages 5-6.
TV/VTR	Press when you are finished using a VCR and you want to switch to the TV input.
+
	Your VCR power will remain on.
MTS	Press this button to cycle through the Multi-channel TV Sound (MTS) options.
GUIDE	(see page 21).
	GUIDE is a feature of DBS, refer to your DBS operation instructions.

CAPTION VISION			SET UP￿
				CHANNEL SET UP￿
(Closed Caption)				FAVORITE CHANNEL￿
				CHANNEL BLOCK￿
				VIDEO LABEL￿
				CAPTION VISION:CC1￿
				MENU￿
	￿
	￿
		Move		Select	Exit MENU

Some programs are broadcast with CAPTION VISION.

CC1, 2, 3 or 4

Shows you a printed version of the dialog or sound effects of a program. (The mode should be set to CC1 for most programs)

TEXT1, 2, 3 or 4

Shows you network/station information presented using either half or the whole screen. It is not usually related to the program.

XDS (Extended Data Service)

Shows a network name, program name, program length, and time of the show if the broadcaster offers this service.

Note

•Poor reception of TV programs can cause errors in CAPTION VISION and XDS. Captions may appear with a white box or other errors instead of intended text.

15

— 13 —