Sony KV-27V40 service manual Additional Connections

KV-27S40 / 27S45 / 27S65 / 29SL40 / 29SL40A / 29SL40C/ 29SL45 / 29SL65 / 29SL65C/ 29XL40M / 29XL40P / 29XT11A

Connecting and Installing the TV (continued)

Additional Connections

The following connections are for accessories that will enhance your viewing options.

Connecting a DVD Player

1Using A/V connectors, connect LINE OUT on your DVD to VIDEO IN on your TV (Red-AUDIO Right, White-AUDIO Left, Yellow-VIDEO).

Note

•For the best picture quality, connect the DVD player directly to the TV.

Disconnect all power sources before making any connections.

For optimum picture quality, use S VIDEO		(Rear of TV)
instead of the yellow A/V cable. S Video
does not provide sound, your audio		VIDEO IN
		1 2
connectors must still be connected.		S VIDEO
		VHF/UHF
		AUDIO OUT
		(VAR/FIX)
		VIDEO
(Rear of DVD player)		L
		(MONO)
LINE OUT		AUDIO
		R
AUDIO R AUDIO L VIDEO S VIDEO
		AUDIO-R (red)
1	AV outputs	AUDIO-L (white)
		VIDEO (yellow)

VMC-810S/820S (not supplied)

Connecting an audio system

For enhanced sound, connect your audio system to your TV.

1Using AUDIO connectors, connect AUDIO OUT on your TV to one of the unused line inputs (e.g. TV, AUX, TAPE 2) on your stereo (White-AUDIO Left, Red-AUDIO Right).

2Set your stereo to the chosen line input (e.g. TV, AUX, TAPE 2). Refer to page 20 of this manual for additional audio setup instructions.

10

(Rear of TV)
VIDEO IN
1	2
VHF/UHF	S VIDEO
		1 AUDIO-L (white)
	AUDIO OUT
	(VAR/FIX)
	VIDEO
	L
	(MONO)
	AUDIO
	R	AUDIO-R (red)

2

RK-74A

(not supplied)

Line input

HRD

Connecting two VCRs for tape

Disconnect all power sources before making any connections.

editing using MONITOR OUT

• KV-27V40, 27V45, 27V65 only

MONITOR OUT gives you the ability to use a second VCR to record a program being played by the primary VCR or to perform tape editing and dubbing.

1	Connect the VCR intended for playback
	using the setup instructions on page 7 of
2	this manual.
	Using A/V connectors, connect AUDIO
	and VIDEO IN on your VCR intended for
	recording to MONITOR AUDIO and
	VIDEO OUT on your TV.

You cannot change video inputs while editing using

MONITOR OUT.

VCR (for playback)

AUDIO R AUDIO L VIDEO

OUT

LINE IN

OUT

1

(Rear of KV-27V65)
AUX
TO
CONVERTER
	IN	OUT
VHF/UHF	VIDEO 1 VIDEO 3	MONITOR AUDIO
		(VAR/FIX)
		S VIDEO
		VIDEO
L		VCR (for recording)
(	)
		AUDIO R AUDIO L VIDEO
		OUT

LINE	IN
IN

2	VIDEO (yellow)
	AUDIO-L (white)
	AUDIO-R (red)

Connecting a camcorder

This connection is convenient for viewing a picture directly from your camcorder.

VMC-810S/820S (not supplied) VMC-810S/820S (not supplied)

If you have an S Video equipped camcorder, you can use an S Video connection for optimum picture quality.

(Front of KV-27V40, 27V45, 27V65 only)

Using A/V connectors, connect AUDIO and VIDEO OUT on your camcorder to AUDIO and VIDEO IN on your TV (Yellow-VIDEO, White-AUDIO Left, Red-AUDIO Right).

Connection can also be made directly to your A/V input located on the rear of your TV.

Note

•If you are connecting a monaural camcorder, connect only the single white audio output to the left input on your TV.

AV output

	VIDEO 2 INPUT
	VIDEO L(MONO)-AUDIO-R
	VIDEO L(MONO)-AUDIO-R
	VIDEO 2 INPUT
VIDEO (yellow)	AUDIO-R (red)

AUDIO-L (white)

VMC-810S/820S

(not supplied)

11

— 11 —