Tandberg Data LTO-3 HH, LTO-2 HH, LTO-1 HH user manual Scsi Host Adapter, Linux System Command

Page 27

Tandberg Data

Software Installation

 

 

 

5.7 Linux

5.7.1 SCSI Host Adapter

Linux contains a driver for most SCSI host adapters.

If the driver cannot be found, please refer to the documentation provided with the SCSI host adapter.

5.7.2 Tape Drive Installation

1.Install the Tandberg LTO HH Tape Drive.

2.Turn on the PC.

3.During the boot process, Linux automatically detects the LTO HH and installs the correct tape driver.

For improved performance using the Tandberg LTO HH, a specific system file can be modified:

/etc/stinit.def

stinit.def File entries for Tandberg LTO HH:

manufacturer="TANDBERG" model = "TS400" { scsi2logical=1

can-bsr=1 auto-lock=0 two-fms=0 drive-buffering=1 buffer-writes read-ahead=1 async-writes=1 can-partitions=1 fast-mteom=1

mode1 blocksize=0 density=0x42 compression=1 # 400 GB, native mode2 blocksize=0 density=0x42 compression=0 # 200 GB, LTO

}

Note:

For any questions related to this operating system or its embedded backup applet, please refer to the documentation provided on the Linux CD-ROM.

5.7.3 Linux System Command

TAR, CPIO and DD allow simple Backup, Verify or Restore operations to be performed. Two different device drivers can be used:

A Non Rewind device driver (used to perform append backup)

A Rewind device driver (used only to perform overwrite backup)

Tar command examples:

Tandberg LTO HH Installation and User Manual

23

Image 27
Contents Tandberg LTO HH Trademarks Change logTable of Contents Tandberg Data Contents Introduction Features and BenefitsTandberg Data Introduction How to Contact Tandberg Data Technical SupportPower Requirements SpecificationsMedia Specifications and Compatibility Mechanical DimensionsData Compression Heat DissipationTape Drive Installation Solution ContentsTape Backup Software Installation Allowed mounting orientations Mounting Screw RequirementsScsi Bus Interface Scsi Controller Board InstallationSCSI-ID Selection Tandberg LTO HH Internal Tape Drive Scsi ConfigurationSCSI-bus Termination SCSI-ID Selection Tandberg LTO HH External Tape DriveTermination in General SCSI-bus Termination External Tape Drives SCSI-bus Termination Internal Tape DrivesExternal Tape Drive Installation Installation Internal Tape DriveVerifying Tape Drive Operation 10 Connecting the external Tandberg LTO HH tape driveFront LED Indicators Tape Drive OperationTape Cartridge Operation Loading a Data Cartridge Into a Tandberg LTO HH Write Protecting the CartridgeEjecting a Data Cartridge From a Tandberg LTO HH Cleaning the Tape DriveRecommended Cleaning Interval Cleaning ProcedureStoring LTO Cartridges Cleaning Cartridge ReplacementHandling and Storing LTO Cartridges Handling LTO CartridgesWindows 2000/2003/XP Software InstallationWindows Tape Driver Windows Tape Driver Installation Windows Embedded Backup ApplicationHost Adapter SCO Open Server System CommandsTar command examples SCO Open ServerSCO UnixWare SCO Open Server Backup ManagerInstallation SCO UnixWare System CommandTape Drive Installation Sun System CommandSun Solaris IBM AIX Storage Manager IBM AIX System CommandHP/UX 2 HP/UX System CommandLinux System Command LinuxScsi Host Adapter FlashIt Firmware Upgrade Utility TDkit Tool for Testing and Downloading FirmwareTape Drive Utilities Software Checking TroubleshootingStandalone Diagnostics Hardware CheckingStarting the Test Test SequenceFailure Indication Cleaning is required Media Management ReportingDegraded Media Problem Situations Dead on ArrivalDamaged Front Bezel Drive Not Detected by the Operating System OS Will Not Insert/Hold Media /Media is Not RecognizedNoisy Tape Drive Cartridge is Stuck Inside the Drive Fault LED Flashes Amber and the Activity LED is OffIntermittent Failures Cleaning LED Is onIncorrect Data Compression Slow PerformanceTape Removal Procedure If the problem occurs in the middle of an operationIf the error occurs always on the same file or directory Glossary of Terms Ultra/Ultra2 ScamLED-behavior During Normal Operation App. A. LED-Indicator BehaviorTandberg Data LED Bahavious

LTO-1 HH, LTO-2 HH, LTO-3 HH specifications

Tandberg Data has long been recognized as a leading provider of innovative data storage and backup solutions, and their tape drives, specifically the LTO-1, LTO-2, and LTO-3 Half Height (HH) models, represent a significant advancement in data storage technology. These systems are designed to meet the demands of modern data management, balancing capacity, speed, and reliability.

The LTO-1 HH, introduced in 2001, marked a groundbreaking step in the linear tape-open (LTO) technology. It offered a native storage capacity of 100 GB and a compressed capacity of up to 200 GB. The tape drive featured a data transfer rate of 20 MB/s, allowing for efficient backup processes. One of the key technologies in the LTO-1 was its use of ultral Linear Tapes, which helped in maintaining the integrity of data over extended periods. The built-in data compression capabilities also contributed to the efficient storage of large volumes of data, making it suitable for small to medium-sized businesses.

Building on the success of the LTO-1, the LTO-2 HH was launched, significantly enhancing performance with a native capacity of 200 GB and a compressed capacity of up to 400 GB. The data transfer rate improved as well, reaching 40 MB/s. The LTO-2 introduced the concept of WORM (Write Once, Read Many) technology, which added a layer of security by ensuring that data could not be tampered with after being written. This was particularly important for industries requiring regulatory compliance. Enhanced error correction and data integrity features were also hallmarks of the LTO-2, ensuring reliable long-term data storage.

The LTO-3 HH followed suit with even greater advancements, providing a native capacity of 400 GB and a compressed capacity of 800 GB, along with a data transfer rate of up to 80 MB/s. Its improved track layout and data encoding methods further enhanced performance and reliability. Additionally, LTO-3 introduced the partitioning feature, which divided the tape into virtual partitions for more efficient data management, allowing users to access data faster. The data encryption capabilities introduced with LTO-3 provided enhanced security, protecting sensitive data during backup and storage.

Together, these Tandberg Data LTO tape drives showcase a remarkable evolution in data storage technology, offering robust solutions that cater to businesses of all sizes. Their reliability, security features, and substantial data capacities ensure that organizations can efficiently manage their growing data storage needs in an increasingly digital world.