Tandberg Data LTO-3 HH, LTO-2 HH, LTO-1 HH user manual Tape Drive Installation, Solution Contents

Page 9

3 Tape Drive Installation

3.1 Solution Contents

Note:

Please Check the Package Contents before Beginning the Installation and please check the label on packing box for the actual content.

For Bare Drive:

Internal Tandberg LTO HH tape drive

Quick Installation Guide

Warranty card

For the Internal Kit and Solution:

Internal Tandberg LTO HH or LTO-3 HH tape drive

Internal SCSI cable

Removable LVD/SE terminator

Data cartridge (1 or 5 depending on type of kit/solution)

Application software (optional)

Quick Installation Guide

Warranty card

For the External Tabletop Kit and Solution:

Tabletop Tandberg LTO-1 HH or LTO-2 HH tape drive with power cord

External SCSI cable

External LVD/SE SCSI terminator

Data cartridge (1 or 5 depending on type of kit/solution)

Application software (optional)

Quick Installation Guide

Warranty card

3.2 Tape Backup Software Installation

You will need to install tape backup application software that supports the Tandberg LTO HH tape drive. For the latest supported software version, please go to www.tandbergdata.com and select SUPPORT, the actual LTO tape drive and select Compatibilities – or to the backup application software vendor’s Web site.

For installation of tape backup application software, please refer to the software vendor’s installation guide. Please also see section 5 in this document for installation of backup features embedded in the operating systems.

Tandberg LTO HH Installation and User Manual

5

Image 9
Contents Tandberg LTO HH Trademarks Change logTable of Contents Tandberg Data Contents Introduction Features and BenefitsTandberg Data Introduction How to Contact Tandberg Data Technical SupportMedia Specifications and Compatibility SpecificationsMechanical Dimensions Power RequirementsData Compression Heat DissipationTape Drive Installation Solution ContentsTape Backup Software Installation Allowed mounting orientations Mounting Screw RequirementsScsi Bus Interface Scsi Controller Board InstallationSCSI-ID Selection Tandberg LTO HH Internal Tape Drive Scsi ConfigurationSCSI-bus Termination SCSI-ID Selection Tandberg LTO HH External Tape DriveTermination in General SCSI-bus Termination External Tape Drives SCSI-bus Termination Internal Tape DrivesExternal Tape Drive Installation Installation Internal Tape DriveVerifying Tape Drive Operation 10 Connecting the external Tandberg LTO HH tape driveFront LED Indicators Tape Drive OperationTape Cartridge Operation Loading a Data Cartridge Into a Tandberg LTO HH Write Protecting the CartridgeRecommended Cleaning Interval Cleaning the Tape DriveCleaning Procedure Ejecting a Data Cartridge From a Tandberg LTO HHHandling and Storing LTO Cartridges Cleaning Cartridge ReplacementHandling LTO Cartridges Storing LTO CartridgesWindows Tape Driver Windows Tape Driver Installation Software InstallationWindows Embedded Backup Application Windows 2000/2003/XPTar command examples SCO Open Server System CommandsSCO Open Server Host AdapterInstallation SCO Open Server Backup ManagerSCO UnixWare System Command SCO UnixWareTape Drive Installation Sun System CommandSun Solaris IBM AIX Storage Manager IBM AIX System CommandHP/UX 2 HP/UX System CommandLinux System Command LinuxScsi Host Adapter FlashIt Firmware Upgrade Utility TDkit Tool for Testing and Downloading FirmwareTape Drive Utilities Standalone Diagnostics TroubleshootingHardware Checking Software CheckingStarting the Test Test SequenceFailure Indication Cleaning is required Media Management ReportingDegraded Media Problem Situations Dead on ArrivalDamaged Front Bezel Drive Not Detected by the Operating System OS Will Not Insert/Hold Media /Media is Not RecognizedNoisy Tape Drive Cartridge is Stuck Inside the Drive Fault LED Flashes Amber and the Activity LED is OffIncorrect Data Compression Cleaning LED Is onSlow Performance Intermittent FailuresTape Removal Procedure If the problem occurs in the middle of an operationIf the error occurs always on the same file or directory Glossary of Terms Ultra/Ultra2 ScamLED-behavior During Normal Operation App. A. LED-Indicator BehaviorTandberg Data LED Bahavious

LTO-1 HH, LTO-2 HH, LTO-3 HH specifications

Tandberg Data has long been recognized as a leading provider of innovative data storage and backup solutions, and their tape drives, specifically the LTO-1, LTO-2, and LTO-3 Half Height (HH) models, represent a significant advancement in data storage technology. These systems are designed to meet the demands of modern data management, balancing capacity, speed, and reliability.

The LTO-1 HH, introduced in 2001, marked a groundbreaking step in the linear tape-open (LTO) technology. It offered a native storage capacity of 100 GB and a compressed capacity of up to 200 GB. The tape drive featured a data transfer rate of 20 MB/s, allowing for efficient backup processes. One of the key technologies in the LTO-1 was its use of ultral Linear Tapes, which helped in maintaining the integrity of data over extended periods. The built-in data compression capabilities also contributed to the efficient storage of large volumes of data, making it suitable for small to medium-sized businesses.

Building on the success of the LTO-1, the LTO-2 HH was launched, significantly enhancing performance with a native capacity of 200 GB and a compressed capacity of up to 400 GB. The data transfer rate improved as well, reaching 40 MB/s. The LTO-2 introduced the concept of WORM (Write Once, Read Many) technology, which added a layer of security by ensuring that data could not be tampered with after being written. This was particularly important for industries requiring regulatory compliance. Enhanced error correction and data integrity features were also hallmarks of the LTO-2, ensuring reliable long-term data storage.

The LTO-3 HH followed suit with even greater advancements, providing a native capacity of 400 GB and a compressed capacity of 800 GB, along with a data transfer rate of up to 80 MB/s. Its improved track layout and data encoding methods further enhanced performance and reliability. Additionally, LTO-3 introduced the partitioning feature, which divided the tape into virtual partitions for more efficient data management, allowing users to access data faster. The data encryption capabilities introduced with LTO-3 provided enhanced security, protecting sensitive data during backup and storage.

Together, these Tandberg Data LTO tape drives showcase a remarkable evolution in data storage technology, offering robust solutions that cater to businesses of all sizes. Their reliability, security features, and substantial data capacities ensure that organizations can efficiently manage their growing data storage needs in an increasingly digital world.