Getting started | 04 |
DIMMER (Brightness of the display window)
You may adjust the brightness or turn off the display on the front panel of the unit.
Select “DIMMER” and select the display window status from the list below.
AUTOMATIC:
When the power is on, the display window appears bright. When the power is off, it appears dark.
DIM:
The window display always appears dark.
OFF:
When the power is on, the display window appears dark. When the power is off, it is turned off.
DISPLAY/CALL (Turning the screen display “ON” or “OFF”)
You can turn off the screen display that is output to the TV screen by this unit. Select “DISPLAY/CALL”, and select “ON” or “OFF”.
ON:
The screen display appears.
OFF:
Nothing but the SETUP MENU and error messages appear.
Setting the screen
This section describes settings about the screen.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Select “AV SETUP 1” from “AV SETUP”. For the procedure, see steps 1 to 3 in “Using the SETUP MENU” on page 23.
SETUP MENU
TIMER REC SET | AV SETUP 1 |
|
| |||||
SYSTEM SETUP |
|
|
| 4:3 Letter box | ||||
| TV SCREEN |
|
|
| ||||
AV SETUPSTILLMODE |
|
|
| AUTOMATIC | ||||
|
|
|
|
| VIDEO |
| ||
RECLINE1SETUPINPUT |
|
|
|
| ||||
|
|
|
|
| VIDEO |
| ||
CH SETUPLINE2 INPUT |
|
|
|
| ||||
|
|
|
|
|
|
|
| |
OTHER |
|
|
|
|
|
| ||
|
| SELECT |
|
|
|
|
| |
ENTER/ | ENTER | RETURN | BACK | SETUP | END | |||
SELECT | ||||||||
|
|
|
|
|
| |||
TV SCREEN
You can select the TV screen size to suit the screen image.
Select “TV SCREEN” and select screen size from the list below.
4:3 Pan scan
It displays a wide picture across the whole screen with left and right edges automatically cut off.
4:3 Letter box
Select this mode when connecting to a conventional TV. When playing back a wide screen DVD disc, it displays a wide picture with black bands at the top and bottom of screen.
16:9
Select this mode when connecting to a
Note
•If the DVD disc is not formatted in the pan scan format, it displays a 4:3 aspect ratio.
STILL MODE
You can set the type of image displayed on the TV screen when the playback of the DVD is stilled. Select “STILL MODE” and select the image to be displayed from the list below.
AUTOMATIC
The field still or frame still is automatically selected. (For normal use.)
STILL BY FRAME
The frame still is set.
Note for the field still and frame still: (with 480i interlaced scanning mode)
•Field* still (240 lines)
Since only one field (half of the video information) is shown on the TV screen, the picture appears rough but does not shake.
•Frame* still (480 lines)
Two fields are alternatively shown on the TV screen. The picture shakes but the resulting picture quality is superior to the field still pictures.
Field*: | A field refers to the video information in |
| |
| consists of 2 fields. |
Frame*: | A frame refers to the total area occupied |
| by each picture on the TV screen. |
29
En